The human body sensor adopts pyroelectric infrared technology, built-in human body infrared sensor module, light effect sensor module, and delay switch module. Adopt industrial district-level chips, with large load capacity and strong anti-interference ability.

When a person enters the sensing range, it can be automatically turned on, and after a person leaves, it can be automatically turned off after a delay. This eliminates the artificial waste of conventional lamps that are turned on or turned off by no one, and prolongs the service life of the lamps.

It can automatically identify day and night, and the external environment illuminance at the beginning of work can be freely selected, so that it can work automatically at night and turn off during the day. Users can adjust by themselves;

The detection distance is adjustable and can be adjusted according to the place of use;

The light on time is adjustable, which can be adjusted by the user according to local conditions.

【adjust】

1) LUX

Is to regulate day or night work.

A: When adjusted to the sun position, the sensor works all day;

B: When the position of the moon is adjusted, the sensor does not work during the day, and automatically enters the working state at night.

2) TIME

It is to adjust the delay time of the sensor (10±2sec~7±1min)

Delay time refers to the time for the sensor to turn off after the sensor has sensed a person and the person leaves the sensing area.

3) SENS

It is to adjust the sensitivity of the sensor. Generally, no adjustment is required. If the induction is too strong and the light is always on, you can adjust the sensitivity to the minimum position.

【The main technical parameters】

Detection range: 180°Working voltage: DC 12V/AC110-240V

Color: black/white/grey

Detection distance: maximum 10m (24℃) (adjustable)

Delay time: 15 seconds to 6 minutes (adjustable)

Environmental illumination: 2 ~ 2000LUX (adjustable)

Working temperature: –10℃~ +40℃

Working humidity: less than 93% RH

Installation height: 1.8m ~ 2.5m

Material: ABS

Dimensions: 60*45*160mm

Installation method: open type, (opening 16 12 10 mm) when installing, the adjusting button faces downwards