HG0013778

Specification:

• Brand new

Wireless Remote Control

• Material: ABS Plastic

• Battery:23A Battery (not included)

• Operating voltage: 12V

• Frequency: 433MHZ

• Current job: 9 ~ 12mA

• Transmitting power: 10-15mw

• Frequency deviation: ± 0.2MHz

• Size (approx.): 58x38x15 (mm) (LxWxH)

• Suitable for all lights.

• Easy to install and simple to use.

• Energy-saving and environment protection

• Fast response and long control distance.

• Application: Garage Door, Household Electrical Appliances, RGB lights

• Stable performance and strong to resist interference, not obstructed by walls and furniture!

• Reference distance: 150 meters (This is the theory distance in open environment without interference, practical application due to the interference environment and decreased)

• Characteristic: Double control(wall switch function and control function),safety(the shell applies to the fire-retardant material),easy installation(just wire connection)

1 Channel Wireless Relay Switch

• Channel: 1CH

• Output Current: 10A

• Input Voltage: DC10-14V

• Working Voltage: DC12V

• Standby Current: ＜5MA

• RF Frequency: 433MHZ

• Receiver Sensitivity: >90dBm

• Dimension (approx.):3.5*3*1.6cm

• RF Working mode: Super heterodyne receiver

• Remote Control Distance: >100 meter(In open environment)

• Decoding Way: MCU Software decoding

• Can store the number of remote control:50

• Support remote control type: Fixed code, learning code

• Wiring Method: Fixed wiring terminal

• Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC

• Output: Normally open, Common, Normally closed

• Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)

Working/output way:

• Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.

• Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.

• Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

• Delay: Press remote control relay pull-in, release the remote control and begin timekeeping, after 5s,10s,15s will automatically close the relay

Package Included:

• 1x 1 Channel Wireless Relay Switch

• 1x Wireless Remote Control (not include the battery)

Note:

• If want to change the modes, need delete the present learning mode(Press the white learning button on the control panel eight times), and then re-learn the new features

• Please allow minor error due to manual measurement.

• Due to the difference between different monitors, the picture may not reflect the actual color of the item.

​