Item specifics
-
Brand Name
diymore
-
Certification
CE
-
Origin
CN(Origin)
-
Phase
Single Phase
-
Current Type
DC
-
Usage
SVC
-
is_customized
Yes
Parameter:
Type: Non-isolated power supplyInput range: 19-45V DCDimensions: 120mm*60mmOutput range: 60-165V DCUniversal size: 26-55 inch LED TVOutput current: 10MA-1000MA can be set according to needsPrecautions:
The working voltage of the light bar must be any voltage between 60V and 165V. It cannot be lower than 60V; the design limit working voltage of this product should not be higher than 165V. If the voltage exceeds this voltage, the screen will be dark or the lamp will flicker.This product is only constant current, not constant voltage, the voltage will be automatically adjusted to the corresponding voltage according to the demand voltage of the light bar;There is no problem with the quality and performance of this product, and it may not be able to light up for modification, because the parameters of the modified product are unknown, voltage, power supply, connection, structure, etc. may cause mismatch.Possible problems with correct lightingOption One:After connecting the dimming foot, try to use the remote control to adjust the brightness to see if it can be solved. If it can’t be solved, test the voltage of the actual pin. ). If it is an analog voltage mode, the voltage range is between 0V-5V or 0V-3.3V. If the voltage is always high and cannot be reduced, this should be adjusted; if it is a PwM signal, the voltage is stable at 3.3V.Option II:Adjust the resistance on the board to increase the current to meet the requirements.
|
Complementos Moda