Features:

• This self priming drill pump is designed to work with a corded or cordless drill,fits most electric drills;Converts virtually any drill into a high capacity pump capable of emptying sinks,aquariums,pool skimmers and much more
• Small size, light weight and portable,convenient installation;this electric drill powered pump is suitable for home, garden and outdoor
• Ideal for transferring light liquids, such as fresh water, sea water, oil, dilute organic solvents, insecticides and liquid fertilisers
• Engineering plastic body and stainless steel internal parts avoid corrosion
• Self-priming up to 9ft(2.75m) and pumps water out to maximum distance of 45ft(13.7m);Pumps up to 300 U.S GPH(1136L/hr);Pump connects to 1/2inch(1.3cm) diameter tubing

Specification:

• Material: Engineering plastics
• Pump shank:8mm round shank
• Transmission medium:oil/water pump
• Self-priming:9ft
• Impeller structure:Rubber impeller
• Fitment:For electric drill

Operation instruction :

• 1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
• 2. Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
• 3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line.
• 4. It is recommended that the pump is mounted to a surface for security and ease of use.
• 5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. If not, check that inlet tube is properly mounted to inlet.
• 6. Do not run dry. If pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on fluid being pumped for lubrication.

NOTE: DO NOT run pump in reverse.
 

Package Included:

• 1 x Drill pump
• 2 x Hose clamps
• 2 x Connectors