Black Shark Magnetic Cooler

Ultra Magnet Design | No need to clip | Fast Cooling

Automatic magnetic alignment
Convenient installation

Black Shark’s  fast cooling technology

Heat transfer magnetic sticker
For use with various other devices

Comes with a 1.5m double-ended Type-C cableBrand new magnetic design

Easy to use

For the first time, we have incorporated a magnetic design into a smartphone cooling device attachment, making it super easy to put on and use*.
A super-strong magnetic ring composed of 15 NdFeB
magnets keeps it on the device more solidly than other clip-on cooling attachments*.

（*It is not recommended to use the iPhone12 series with a common smartphone case,
because if the shell is too thick, it will prevent the magnet from holding onto the phone）Immediate and continuous cooling

Another masterpiece from the Black Shark
Cooling Universe

112 high-quality heat transfer fins, 7200 RPM high-speed fan, efficient heat transfer plate.
Working together, these three elements can reduce smartphone temperatures by 23°C*. Allowing the phone to release its full potential.

（*The data in the above pages are theoretical values, which are obtained from the Black Shark Laboratory under
specific circumstances. The actual data may vary due to external and environmental conditions.）Smaller, Lighter, Better Looking

The new Magnetic Cooler is smaller and slimmer in size.
Weighing in at only 73g, it helps to reduce the burden players put on their wrists. The outer ring was made with a metal anodic oxidation process to further improve the texture of the attachment.Comes with a heat transfer magnetic sticker in the box
Compatible with different devices

In order to adapt to mobile phones and tablets that do not have a magnetic area, we have created a special heat
transfer magnetic sticker.
Simply stick the magnetic sticker onto the back of the device. Then, you can use the Black Shark Magnetic Cooler as normal.Instructions for placing the heat transfer magnetic sticker

1. Use an alcohol cotton pad or paper towel to clean the area where the magnetic sticker will be attached.

2. Tear the No.1 film first and paste the protective film on the area that will hold the Black Shark Magnetic Cooler. Smooth out any bubbles in the film so that the protective film fits perfectly with the back of the phone. And then tear the No.2 film.

3. Tear off the base paper on the adhesive of the magnetic sticker and press the magnetic sticker to the protective film. Press and hold for 30 seconds, and then let it stand for 1 hour before use.1.5m double-ended Type-C cable inboxUnlock new and innovative uses

One machine for multi-purpose. It can also be used as a mobile phone holder, magnetic nails, decorative crafts, etc.

Compatible devices