AS-20 DC 12V AC 110V 220V 10A Waterproof Sensitive Auto Photo Switch On/Off Photocell Street LED Light Switch Sensor Switch Tools

Product parameters:

1. Working voltage: 220VAC/110VAC/12VDC 10A 50Hz/60Hz
2. Load power: incandescent lamp ≤1000W, energy-saving lamp, fluorescent lamp, exhaust fan ≤400W
Product features: automatic black on daylight

Features:

1. There is an automatic detection circuit for ambient illumination inside, which is automatically turned off during the day and automatically turned on at night.
2. It adopts three-wire system and is compatible with various loads of resistive, inductive and capacitive lamps.
3. The control object can be LED light, energy saving light, fluorescent light, incandescent light, exhaust fan light, and the like.
4. It has the delay function when the environmental conditions change, and the delay time is 3-5S, which solves the problem of the screen flash of the load when the short-term environmental conditions change.

Application range:

Widely used in street lights, highways, factories, gardens, ports, airports, farms, parks, schools and other places.

Test:

1, the wiring method can not be wrong, according to our instructions.
2, in the daytime test open or close, please use opaque, wrapped in the switch, the switch lights up and work normally.

I. Brief description

General factory, school, street lights, navigation lights on the island. During the day, the duty officer turns off the lights and turns on the lights in the dark. It often causes the switch to be turned off or turned off in time. This will not only waste power, but also affect work.
Based on the relevant information in various aspects, and based on the previous experience of