Note: Since each product size uses the same PCB board, the silk screen on the back will appear the same, but the actual parts used are different, please test to get the product

PLEASE NOTE: Some versions of the factory have updated style parts, but the same .

This power module is suitable for industrial equipment, smart home, electronic products, toys, power adapters, LEDs, home appliances.....

AC input: (VAC) AC60-277V (AC85-265v recommended)
DC input: (VDC) DC80-390V (DC100-370V recommended)
Frequency range: (Hz) 47-63
Input current: (A) 0.06/115VAC 0.03/230VAC
Surge current: (A) Cold start: 5A/230VAC
No-load standby: (mW) New micro power consumption 5V ≤ 30MW 12V ≤ 75MW
Standby power consumption: less than 0.3W
Working temperature: °C - -25-70°C
Temperature drift coefficient: - ±0.02%/°C
Storage temperature and humidity: - -40...+85°C 10-95RH
Switching frequency: (KHz) - 0.8-65 (inverter control chip)
Insulation voltage: (VAC) input to output, test 60s ≤ 5mA
Insulation resistance: (MΩ) input to output, 500VDC 100
Leakage current: (MA) 500VDC input to output ≤ 1mA / RMS
Vibration resistance: - 10-500Hz 2G 10 minutes / cycle X, Y, Z each 10Min
Multiple protection: over temperature, over current, over voltage, output short circuit, secondary open circuit protection



Output voltage: (VDC) - 5.1V ± 5% 12.1V ± 5% Other ± 5%
Output voltage accuracy: - 4.85-5.35V 11.5-12.7V
Rated current: (MA) 2000MA/1700MA/800MA/700MA/500MA
Rated power: (W) - 8.5W
Ripple and noise: (mvp-p) Rated input voltage 20MHz bandwidth 2% of output voltage
Linear adjustment rate: full load ±1%
Load regulation rate: 10-100% load ±3%
Startup. Rise time: Full load 836ms, 7.4ms/90VAC 500ms, 7.4ms/230VAC
Hold time: (ms) Full load 16ms/115VAC 50ms/230VAC
Overload protection: 115%-150% of rated input voltage / rated output power / Protection mode: Doze mode, automatic recovery after abnormal load condition removal
Short circuit protection: rated input voltage long-term short circuit, self-recovery overcurrent protection / full load constant current mode
Start delay time (ms) Vin: 230VAC 7.4ms
Power down retention time (ms) 50ms