Color	A B C D
A B C D

Descripción
Comentarios de clientes(0)

Item specifics

Certification CE
Origin CN(Origin)
Phase Single Phase
Current Type AC
is_customized No
Model Number 2000W

Product Description

AC 220V 4000W SCR Voltage Regulator Dimming Dimmers Motor Speed Controller Thermostat Electronic Voltage Regulator Module
Specification:

Voltage: AC 220V

Maximum Power: 4000W resistive load limit power, it is recommended to use within 2000W for a long time at room temperature

Voltage Adjustment: 0-100% (220 volts divided into 100 levels, non-linear)

Fuction:

The new bidirectional high-power thyristor is used, because the current can reach 40 amps, which solves the over-current problem caused by the resistance of the electric furnace wire being too small under cooling. 0-100% (220 volts, 100-level adjustment, non-linear) can be adjusted arbitrarily for electrical appliances. Such as: electric furnace, water heater, dimming of lamps, small motor speed, electric iron temperature. So as to achieve the effects of dimming, temperature and pressure. Available for large appliances with an electric power of less than 2000 watts. Because the power is already large, ordinary household appliances or small factories are sufficient. (This voltage regulator is equipped with bidirectional high-power thyristor, which can be used without adding any components, which is very convenient and practical). Comes with a heat sink.

Specification:

Maximum power: 4000 W (resistive load connected)

Voltage regulation: AC 0-220 V, starts from AC 10 V

Protection: anti-peak, surge, RC absorption (EOC)

Stable and durable.

Used in electric furnace, water heater, lamps, small motor, electric iron etc.

How to Use:

The input is connected with the AC 220V.

Output wire is connected to the electric cooker or appliance motor.

Turn the knob for speed, voltage, temperature control.

Package included:

1 x Voltage Regulator
1 x Power Regulator

Note:
Charge does not exceed the maximum power, otherwise it will burn the module and electrical appliances; Use the resistive load as much as possible; Reduce the capacitive and inductive load of much energy. (It is best to leave more than half of them).