6.39 inch lcd For XIAOMI MIX 3 LCD Display Screen Digitizer With TOUCH For Mi mix3 Mix 3 LCD for mix 3 5G Touch panel

with fingerprint

Please look carefully at the video screens we sent. In videos, we also explain how to solve the problem of touch not working. This is original. We have a test for each product before shipment. Guarantee 100% work. We need to test 30-50pcs of original MI mix3 every day, and we also encounter the problem that touch does not work. This is not a product problem, but the flex link port is not connected correctly. （It is absolutely true that every LCD is well tested before being sent）

1，  Remove the LCD connection port, and then reconnect

2，  Remove the battery and reconnect

How to Install / Tips:

1. When you open the screen assembly, in order not to break the home button flex, please use proper strength and the angles between the screen and the rear housing should be within 30°.

2. After pry up the screen assembly, keep the angles between the screen and the rear housing within 90° in order not to damage the flex cables.

3. First unplug the front facing camera flex connector, then LCD screen flex connector, last the digitizer flex connector.

4. The flex cables should be bent a little bit before the installation, but do not use too much strength.

5. Do not force any strength on IC which located on the flex cable.

6. When connect the connectors, keep the angles between the screen and the rear housingwithin 90°.

7. Plug the digitizer flex connector, LCD screen flex connector, front facing camera flex connector.

Features