600W Grid Tie Solar Inverter MPPT Pure Sine Wave Micro Inversor DC15-28V PV Input AC120V/220V for 12V Solar Panel Home System

Description:

Smart grid tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in phase with the utility grid.

Technical Parameters:

Solar panels:150W-600W
The Voltage of Matched solar panel:Vmp: 17-21V, Voc: 20-24V
AC Output Voltage: 120VAC(90-140VAC) or 230VAC(190-260VAC)
Frequency Range: 48Hz ~ 62Hz Auto
DC Input: 11V-32V
MPPT range: 15.5-22V.Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency
Certification:CE RoHS

About the AC plug:

We will send the corresponding plug according to your receiving country, please rest assured to buy.

Note:

1.Please note that this inverter is designed for solar panels, which can be suitable for 12V Solar Panels, Vmp is 17-20V and Voc is 20-24V
If using 12v battery as input, the inverter will not reach it's max power point.We will suggest using 24v battery as input source to get a better output power.
there's always a loss in power in conversion from DC to AC. Also through Heat loss of energy. So if you're expecting to get you're 100 % out of the machine it won't give you that. solar panel has the loss too, so please don't calculate the efficiency as inverter output power/solar panel specification. because solar panel and invergter all have own efficiency.Collect multiple customer fault feedback, most of which stop working are using the wrong solar panel voltage input。

2.Please use a 10 square cable, the cable length is not recommended to exceed 4M. Tighten the DC terminal wiring. If the cable is too thin or the connection is loose, the inverter will be damaged.

How to easily set up Y&H Grid Tie Inverter?

1: Use 150W-600W Solar Panel, Vmp17-20V; Voc 20-24V
2: Red terminal: Connect DC positive, black terminal: Connect DC negarive.. Be sure to tighten! ! ! Otherwise it will be short circuited.

AC The output need to be connected to the grid power.

3:AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. 4:The switch of the home outlet must be turned on.