Descripción
Comentarios de clientes(0)

Item specifics

Type DC/DC Converters
Certification RoHS
Origin CN(Origin)
Size 17.2*10.3*5.4mm
Model Number Mini360 Mini 360 DC-DC Buck Converter Step Down Power Supply Module
Output Frequency -
Output Type Single
Output Power 1 - 50W
Weight 0.05KG
is_customized Yes
Output Current -
Model Number Mini360 model

Product Description

5pcs Mini360 RC Airplane Module Mini 360 DC Buck Converter Step Down Board DC-DC 12V 24V to 5V 1A 3.3V 9V Fixed Voltage
Specification:

Size: 17.2 (L) * 10.3 (W) * 5.4 (H) mm

1: using a new chip.

2: the maximum output current of 1.3A, a long time to run within 1A, the margin is sufficient. 1.3A running about 20 seconds into the chip to prevent overheating protection, you can work through the cooling of the chip cooling work at 1.3A current.

3: the use of new design, circuit design does not require electrolytic capacitors and tantalum capacitors (electrolytic capacitor life is short, tantalum capacitor explosion risk). Using the current high-end circuit on the use of large-size solid-state ceramic capacitors (MCC) 2.

4: the use of non-isolated DC synchronous rectification, circuit conversion efficiency is very high, in the 6.5V to 5V 0.7A when the efficiency of up to 97.5%, 12V to 5V 1A when it reached 94%.

5: the use of one-piece forming inductors, ultra-low resistance, to maximize the conversion efficiency. Reduce the heat, improve efficiency, lower than the ordinary shielding inductance heat. In the case of

6: ultra-small size, 17 (long) * 10 (wide) * 5.4 (high) mm, mini.

7: ultra-low quiescent current, 12V input and output 5V voltage, with LED light indicator case - quiescent current less than 0.23 mA. Connected to the car battery without the need for switching, can be connected to the cigarette lighter line, or ACC power line.

8: output integrated optional output voltage, directly on the board can be spot welding, versatility is very strong.

9: Output bandLED lights instructions, To facilitate the visual indication of a voltage output.

10: with enabled port, the default is the operating mode, low level off, for the control to bring convenience

11: can be used to replace the 78 series linear regulator, such as 7805 7812 and so on.

12: input and output are used 2.54mm pitch pinhole, with the same 7805 pin spacing, easy to use processing.