- 0Carrito
-
Su carrito está vacío.
-
más artículos en el carro...
Carro Total: $0.00
Pasar por caja
Su carrito está vacío.
Carro Total: $0.00
Pasar por caja
|
Item specifics
Product Description
PWM Solar Charge Controller 12V24V Auto. 30A/20A/10A Solar Cell Panel Charger Regulator with LCD & Dual USB 5V Output This controller is a intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements. This is NEW Solar Controller ,It can fully meet your home Photovoltaic system(including home lighting system)requirements.It can recongize 12V and 24V Lead acid ,Gel battery automatically.There are optional 10A 20A 30A model 10A: if your battery is 12V ,the max solar panel input is 25V 120W if your battery is 24V ,the max solar panel input is 50V 240W 20A: if your battery is 12V, the max solar panel input is 25V 240W if your battery is 24V, the max solar panel input is 50V 480W 30A if your battery is 12V ,the max solar panel input is 25V 360W if your battery is 24V ,the max solar panel input is 50V 720WFeatures:1.Build-in industrial micro controller. 2.Big LCD display,all adjustable parameter. 3.Fully 4-stage PWM charge management. 4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual mosfet Reverse current protection ,low heat production.Parameter:
*all red color voltage X2 ,while using 24V system. Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus.The reverse order applies when deinstalling! An improper sequence order can damage the controller! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||