Item specifics
-
Certification
None
-
Compatible Audio & Video Equipment Style
Amplifier
-
Origin
CN(Origin)
-
Package
Yes
| Product DescriptionKey featuresSX1276 chip based on ESP32 Wi-Fi, 868 – 915 MHz frequency, high sensitivity over -148 dBm, + 20 dBm output power, high reliability, long-transmission distanceOnboard 32 MB flash Wi-Fi antenna, 0.96-inch OLED display, lithium battery charging circuit, CP2102 interface and USB serial chip, support for Arduino development environmentperfectly, can be used for program checking, product development is very easy and fast.SpecificationsOperating voltage: 3.3 – 7 VOperating temperature range: -40 to 90°C (-40 to 194°F)Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modesData rates: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11bTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11nReceiver sensitivity up to -98 dBmUDP sustained throughput: 135 MbpsReminders1) The 868/915 MHz antenna needs to be connected with the IPEX interface(If the antenna is not connected, the signal may be almost)2) When the battery is full, the blue LED will stop working.3) When using, pay attention to “+” and “-” of the battery.4) With the IO port touchscreen touch signal input, you need to add the 100nF pull-down capacitor to this pin.Red light: power indicatorBlue light: IO25 programmable control |
|
Pin diagram
Test details
Test code:
https://github.com/LilyGO/TTGO-LORA32-V2.0/tree/LilyGO-868-V1.0https://github.com/Xinyuan-LilyGO/TTGO-LoRa-Series
Reminder: This product does not include the battery.
Use legend
Note:This product does not include the battery.
Shipping List:868MHz or 915MHz Board Option2 x TTGO Lora Board (868MHz or 915MHz)
2 x Power cable (Jst 2pin 1.25mm)2 x LoRa Antenna
4 x Pin
|
Fashion Accessories & Bags