Item specifics
-
Brand Name
YIXINYOU
-
Motor Type
DC Motor
-
Power Supply
DC
-
Model Number
Brushless Hub Motor Drive Controller
The kit contains remote control handle + driver board,
A remote control can link multiple drive boards,
That is, single drive, dual drive, 4 drive, etc. can be realized.
The method of linking is to first turn the remote control handle to the brake position and then turn on the remote control handle power switch.
The indicator light flashes red and green alternately,
Then turn on the power switch of the driver board,
At this time, the pairing starts,
The remote control handle indicator is off and the linking is successful.
One remote control controls multiple drive boards to link the frequency method is to link one drive board and then link the next drive board.
The voltage of this drive should be DC24V,
The owner seems to be able to use 36V,
The power is estimated to be 250W.
Note: This kit itself can only run at low speed,
High-speed operation requires modification of the remote control,
Just connect the two wires of the button switch of the remote control to the two wires of the circuit board socket that have been cut off.
See the explanation diagram for details.
There are 4 gears after modification,
The default low-speed gear is turned on.
Press down the speed control knob to switch the speed once. Gears 1, 2 and 3 are 3 speeds respectively.
I don’t know what the 4th gear is for,
The speed is the same as the second gear.
The motor hall wire must be connected to the motor to operate normally.
The shopkeeper’s method is to test the various wiring sequence of the three Hall wires.
It can be successfully exchanged up to 6 times.
|
Complementos Moda