220V 2000W thyristor motor speed regulator high-power voltage and light temperature control module with external potentiometer

This product uses a new two-way high-power thyristor, so the current can reach 25A. It solves the problem of overcurrent caused by too small electric resistance when the electric furnace wire is cooled. It can easily adjust the output voltage of the mains. It can be adjusted between 90~220V. It can be used for many kinds of electrical appliances, such as: electric stove, water heater heat adjustment, lamp light adjustment, small motor speed adjustment, electric soldering iron temperature adjustment Wait. So as to achieve the effects of dimming, temperature and pressure. It can be used for large electrical appliances with a power of less than 2000 watts. Since the power is already large, ordinary household electrical appliances or small factories are sufficient.
(Note: The power of inductive or capacitive load should be reduced. The voltage regulator is equipped with two-way high-power thyristor, and the potentiometers are equipped with screw caps, which can be used by adding any components, which is very convenient and practical).

1.Input voltage: AC 220V;
2.Voltage abj range: AC 50V ~220V,( Note: This is the short-term limit power, and the power should be reduced for long-term use. It is recommended that the room temperature resistive load is within 1000W.);
3.Utimate output: 2000W;
4.Maximum current: 25A;
5.Size: 47mm * 35mm *27mm;
6.Weight: 36g.

Connect this product in series to the circuit of a table lamp or electrical appliance, (that is, disconnect any one of the live wire or neutral wire of the table lamp, electrical appliance, etc., and connect the two wires of this "product"). Rotate the potentiometer The rotating rod can play the role of light and dark adjustment, speed adjustment, pressure adjustment, and temperature adjustment, and it is very convenient to use.