Item specifics
-
Motor Type
DC Motor
-
Model Number
Brushless Motor ESC
Brand new original 4S model aircraft brushless ESC,
Originally used on brand four-axis drones,
This ESC measured 1S-4S can run,
Corresponding working voltage limit 2.8V-18V,
Specific compatible matching motor needs to be tested by yourself,
Just like 2212's 3S voltage motor stepped down to 3V power is too small, there will be problems such as poor startup.
Other motors have not been tested.
The ESC power tube is AON6504 from Bandai,
Parameter 85A30V,
It is estimated that the ESC is nominally between 20A-30A,
It depends on the heat dissipation in different environments.
This ESC has no BEC voltage 5V voltage output,
The external 5V power supply must be supplied to the ESC control terminal to work.
The control terminal voltage range can run between 2.8V-5V,
When the 1S power supply is lower than 5V, the control terminal power supply can be directly connected to the positive terminal of the battery,
2-4S power supply control terminal power supply requires 5V regulated BEC module,
The control terminal cannot directly connect to the battery positive pole,
More than 5V will burn the main control voltage regulator chip,
The method of using the ESC is the same as the ESC without BEC,
The PWM drive signal is universal.
The ESC motherboard weighs about 4 grams.
 |
Complementos Moda