Introduction to Magnetic Proximity Switch/Sensor:

The magnetic proximity switch/sensor is based on the principle of operation between a reed switch and a permanent magnet, using a magnetic field to generate induction (usually a permanent magnet) to turn on the switch, and the reed switch is wrapped and protected with a plastic body for easy installation. The magnetic proximity switch/sensor has a wide range of motion, whether it is long-distance or short-distance sensing can operate normally.

Features:

1. This product is a cylindrical plastic shell, magnetic proximity switch for reed switch, and its appearance size is Ø6*30mm. A variety of sizes are available.

2. Small size, easy to install, reliable performance, plastic shell, resistant to abrasion and high temperature

3. The product is mainly composed of a switch and a magnet. The switch part is connected by a reed switch through a lead wire and sealed in a plastic case. The magnet is encapsulated in a plastic case by a magnet with corresponding magnetic strength. It can also be directly tested with bare magnets. . When the switch is separated from the magnet or close to a certain distance, it will cause the switch to turn on and off to sense the change or distance of the object's position.

4. No standby power consumption, sealed installation, stable work, when the optical sensor cannot work normally due to the bad environment, the magnetic sensor can still be used normally, the installation is simple and easy to adjust.

5. Long service life, built-in imported reed switches from Russia, the United States, Japan, etc., and the service life of the product can reach more than 1 million times. Overcome the wear and durability of traditional mechanical switches

Disadvantages.

6. The product is sealed in a plastic shell, with anti-contact protection, and higher security performance

7. A variety of standardized proximity switches suitable for customer applications can be customized for customers

8. Contact method: NO/NC/SPDT

9. Multiple material options: ABS, Nylon, PC, POM, Nylon, Kynar(PVDF), PVC, Brass or specified

Product Usage:

1. Used on treadmills, sports bicycles, massage chairs and other sports equipment to control speed and ensure safety

2. Security system applied to doors and windows

3. Used in home appliances, such as humidifiers, air conditioners, juice machines, coffee machines, washing machines/washing machines;

4. Used in car counters and notebook computers, mobile phones, scanners, electric irons, door sensor systems and other advanced technology products

5. Used in treadmills, sports bicycles, massage chairs and other sports equipment to control speed and ensure safety

6. Security system applied to doors and windows

Type details:

Normally open type 6X30mm----The size of the plastic part is 6x30mm, the line length is 350mm, and the maximum operating voltage and current are 100V0.5A

Normally open type 6X25mm----The size of the plastic part is 6x25mm, the line length is 350mm, and the maximum voltage and current are 100V0.5A

Normally open type 6X20mm----The size of the plastic part is 6x20mm, the line length is 350mm, and the maximum voltage and current are 100V0.5A

Normally open type 6X15mm----The size of the plastic part is 6x15mm, the line length is 350mm, and the maximum operating voltage and current are 100V0.5A

Normally open type 5X25mm----The size of the plastic part is 5x25mm, the line length is 350mm, and the maximum voltage and current are 100V0.5A

Normally open type 5X20mm----The size of the plastic part is 5x20mm, the line length is 350mm, and the maximum voltage and current are 100V0.5A

Normally open type 5X15mm----The size of the plastic part is 5x15mm, the line length is 350mm, and the maximum operating voltage and current are 100V0.5A

Normally open type 4X18mm----The size of the plastic part is 4x18mm, the line length is 350mm, and the maximum operating voltage and current are 100V0.5A

Normally open type 4X15mm----The size of the plastic part is 4x15mm, the line length is 350mm, and the maximum operating voltage and current are 100V0.5A

Normally open type 3.8X18.6mm, line length 350mm, maximum operating voltage and current 24V0.1A

Normally open type 6X30mm----The size of the plastic part is 6x30mm, the line length is 350mm, and the maximum voltage and current are 220V0.7A

Remarks: Normally open type, that is, the switch is normally open and closed. When the magnet is close, it will be turned on. On the contrary, the magnet will be disconnected when it leaves.

Normally closed type, that is, the switch is normally closed and conducting, and it will be disconnected when the magnet is close. On the contrary, the magnet will be disconnected and conducting.

Working principle:

The proximity switch is connected by a reed tube through a wire, and is shaped and packaged. When a magnetic body approaches, it causes a switch action, and is generally used as a position sensor.

The drawing is 6*30 size, and there are a variety of specifications and sizes to choose from. See options for details.