Item specifics
-
Origin
CN(Origin)
-
Certification
CCC
-
Commutation
Brush
-
Type
Servo Motor
-
Protect Feature
Drip-proof
-
Construction
Permanent Magnet
-
Efficiency
IE 1
Item specifics:
Origin: Switzerland
Brand: faulhaber
Model Number: 0816
Deceleration voltage: 3v
Power mode: DC
|
Condition:An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
|
Germany FAULHABER precision micro gear motor, work very well, very rare with a two-channel photoelectric encoder gear motor, encoder resolution 50 lines a circle, the maximum frequency response 35khz. If the encoder is completely negligible, the motor can operate with a direct 3V voltage. The motor is FAULHABER's 0816 8mm miniature hollow cup motor, made in Switzerland. The motor connection method is a 6p 0.5-pitch flexible cable, which can be purchased by Taobao for a 0.5-pitch pfc cable adapter board.
The goods are tested and the motor decelerates normally. The two-channel test signal of the encoder is tested normally. The internal gears of the gearbox are not worn. Because the gearbox is exposed, there are some dust particles on the gear. You can clean it yourself.
Motor gearbox full metal gear, box aluminum and copper are machined, testing this reduction ratio is about 200:1. This motor and gearbox are threaded and can be separated from the gearbox by unscrewing the motor. The motor was originally powered by a single-cell lithium battery, and the voltage should be in the range of 3-3.5V. The actual test can be run at a minimum of 1.5V. The voltage of 1.5V is 22 rpm, the voltage of 3V is 53 rpm, the voltage of 3.5V is 65 rpm, and the maximum torque of 3V is 0.5kg.cm. The deceleration weighs about 11.5 grams
Package:
Motor x 1
|