Note:

The package with NO FUSE option does not include fuse，There is only one fuse holder

If you need fuse, please select the required Ampere to buy

Collector: 16AWG wire, 16.5cm long.

Size: Mini / Miniature / Small / Medium

Fuse current selection prompt:

The commonly used power taking current is 5A or 7.5A without corresponding fuse 5A current and 7.5A current

If the recorder is connected separately, it is recommended to select 3A or 5A current

If the recorder and electronic gou are to be connected in parallel, it is recommended to select 5A or 7.5A current

Connect three devices: recorder, electronic Gou, navigator, etc., and choose 7.5A or 10A fuse

When connecting LED daytime running lights or other equipment, first confirm the current of the equipment, and then select the appropriate fuse.

The usual LED daytime running light is about 20W, and the fuse with 5A current is safe and sufficient!

Product introduction

- With the ever increasing amount of vehicles manufactured with the CAN BUS wiring system it is becoming increasingly difficult to locate a quick power source without cutting,splicing and soldering.

- This little component overcomes this issue and has the added advantage of a built in fuse holder.

- Therefore is ideal for installing additional accessories,such as phone kits, alarms, central locking kits, games consoles, hard wired sat nav's, accessory sockets, auxiliary lights, driving recorders, trackers etc.


Feature:
1.Allows easy installation of additional circuits without cutting, splicing or soldering.

2.Turns one fuse slot into two therefore providing individual protection for each circuit.

3.Easy installation.

Installation is easy:
1.Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap.
2.Insert a suitable fuse for the new accessory in to the top slot.
3.Crimp your new live wire to the blue butt terminal on the fuse tap.
4.Insert the fuse tap into the fuse box slot where the fuse originally was.