Wireless remote control DC motor controller

Voltage range: DC8V-28V

Working current:

Version with display without housing: rated 2A (not suitable for motors with starting current greater than 5A)

Duty Cycle (PWM): 0%-100% (LED digital tube visual display)

Frequency: 13Khz

Remote control distance: up to 100 meters in an open environment. (Need to pull out the remote control antenna and adjust the receiving motherboard antenna.)

Power supply wiring mode:

V+ is connected to the positive pole of the DC input

V- connect to the negative pole of DC input

Motor wiring mode: M+ connects to the positive pole of the motor, and M- connects to the negative pole of the motor.

Remote control pairing method:

1. Press and hold the motherboard pairing button for 2 seconds and then let go. At this time, the pairing indicator lights up, and then press any button on the remote control. When the pairing indicator goes out, the pairing is successful. If it fails, please try again and again.

2. Long press for about 10 seconds, after letting go, the pairing LED flashes quickly for 2 seconds to clear all previous pairings.

Operation method:

1. Press the encoder to switch the machine, and the speed adjustment supports slow rotation and fast rotation.

2. The middle button of the wireless remote control is turned on and off, △click to accelerate slowly, long press to accelerate quickly. ▽ Tap to slow down slowly, long press to accelerate quickly.

Features

1. The online speed control is a 360-degree precision encoder switch, which has a better control effect than ordinary resistors, and has advantages such as precise speed control and stepping.

2. This governor has a slow start and slow stop function, which effectively eliminates the damage to the circuit and power supply caused by the instantaneous back-EMF impact, greatly reduces the instantaneous sparks generated by the carbon brush of the brushed motor, and effectively extends the life of the motor.

3. The speed governor has its own memory function, which will store the last speed control value.