10Pcs/lot HUANO Micro Switch Long life 80 million clicks Blue Shell White/Blue/Pink Dot computer mouse 3pin button switch

New Original HUANO Mouse Micro Switch

HUANO blue shell white point 20 million times: moderate strength (about 0.74N), strength difference ±0.10

HUANO Blue shell blue point 50 million times: moderate strength (about 0.74N), strength difference ±0.10

HUANO Blue shell powder point 80 million times: moderate strength (about 0.74N), strength difference ±0.10

Per package 10 piece, recommended Blue Shell Pink Dot 80 million clicks high life

Repairing a mouse requires professional skills. When welding a mouse switch, you must pass your own welding skills. Especially if you are a novice or unskilled person, it is easier to weld badly. This is unskilled technology, not a quality problem. You have to understand this.

Note: (1) If the action is too slow during welding, the mouse switch will be damaged. (2) The soldering iron should not stay on the circuit board for a long time, so as not to burn the wiring on it due to the high temperature. (3) The soldering tin should be heated for a short time (the torch should be kept at a constant temperature), and should not exceed 1.5s. If the time is too long, it is easy to double-click. (4) Finally, check that there is no residual solder left on the board to avoid short circuits.