Product introduction:
Rated current: 20mA. 12V DC
Insulation resistance: 100M min. 100V DC
Dielectric strength: 250V AC for 1 min
Contact resistance: 100m_max
Dimension:10*10*9mm
Operating temperature: - 30 C to + 85 C
Life time: 5,0000 Cycles min
Operating force: 4-direction 160 +30 GF Center push 300 +50 GF
Travel: 4-direction 4 +2 Center push 0.20 0.1mm

Package includes:10* Switch

Product uses:
1. Suitable for Headphone Stereo seat, LCD TV, car radio, camera, video recorder, MP3 playback, memory card, etc.
2. Used for various operations requiring thin, lightweight audio equipment, video recorders, communication equipment, cameras, automobiles, etc.
3. Used to operate all kinds of mobile phones, such as mobile phones and electronic devices with compact communication structure, which need high density installation.
4. Applicable to all kinds of electronic audio equipment, office equipment, communication equipment, measuring instruments, TV, video recorder and other operations.
5. Insertion of various media, identification of tapes, on the deck of video recorders, recorders, etc. Inspection operation, video recorders, casstte mechanism, etc.
6. It is suitable for the operation of small portable equipment such as electronic VCR/portable audio and cassette recorder.
7. Applicable to types of electronic equipment, such as audio computer, office, communication, measuring instruments, etc.
8. Digital cameras, digital cameras; portable audio players; mobile phones and other personal digital products; other digital devices for operation
Use precautions:
1. When welding the terminal of the light touch switch, if the load is applied on the terminal, it will be loosened, deformed and electrically charged due to different conditions.
2. The possibility of sexual deterioration, please pay attention to when using.
3. When using through-hole PCBs and PCBs other than those recommended, due to the change of thermal stress, please confirm the welding conditions in advance.
4. When welding twice, please do it after the first welding part is restored to normal temperature. Continuous heating may cause deformation of the periphery, loosening of terminals, shedding and reduction of electrical characteristics.
5. As for the setting of welding conditions, it is necessary to confirm the actual batch production conditions.
The product is designed and manufactured on the premise of DC resistance load. When using other loads [inductive load, capacitive load], please confirm separately.
6. Switches should be used to press the switch directly by human operation. Please do not use for mechanical testing function.
7. When the switch is lightly touched, if more than the specified load is applied, the switch will be damaged. Please be careful not to exert the above force on the switch.
8. Avoid side-by-side operation.
9. For the flat rod type, press the switch center as far as possible. For hinged structures, when pressed, the position of the axle rod will move. Please pay special attention to it.
10. After the switch is installed, please contact professionals when it passes through regenerative hardening furnace due to hardening of binder for other parts.
11. If corrosive gases are produced in the surrounding material of the whole machine using the switch, it may cause bad contact and other phenomena, so please make full confirmation in advance.
12. The carbon contact point has the characteristic of changing contact resistance due to push load. When used in voltage divider circuit, etc., please use it after full confirmation.
13. With regard to models other than airtight ones, full attention should be paid to the invasion of foreign bodies.