especificación	12v 5v

Descripción
Comentarios de clientes(0)

Item specifics

Certification RoHS
Origin CN(Origin)
Theory Voltage Relay
is_customized Yes
Contact Load Low Power
Voltage 12V
Model Number 1 Channel Relay Module Interface Board Shield For Arduino
Power Source DC
Usage General Purpose

Product Description

10pcs 5V 12V 1 One Channel Relay Module Low Level For SCM Household Appliance Control For arduino DIY Kit Features:

1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.

Specification:

1. VCC: Power interface ,5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
5. Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
6. Weight: approx. 120g

Note:

1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.

2. Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.

3. Please allow 1-3mm differs due to manual measurement.

4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.