Description
Customer Reviews(0)

Item specifics

Origin CN(Origin)
Certification CCC
Certification NONE
Current / Phase ULN2003 Module
Step Angle(degrees) Stepper Motor
Phase 4
Type Hybrid
Model Number ULN2003 Driver+ 28BYJ-48 Stepper Motor
Holding Torque Stepper Motor
V DC 5V 12V
ULN2003 module ULN2003 Driver Board Module
Options Driver board; 28BYJ-48 stepper motor

Product Description

38113

RECOMMEND

NOTE:5V And 12V motor's cable are different,please note this before purchase.thanks! 28BYJ-48 Stepper Motor Description:Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step MotorBrand new and high quality.Diameter: 27mm.Voltage: 5V/12V (for options)Step angle: 5.625 x 1/64.Reduction ratio: 1/64.5 lines cable 4 phase stepper motor can be driven by ULN2003 chip.It also can be connected as 2 phase to use.Color: Silver ULN2003 Module: The ULN2003 high power chip drives the stepper motorA, B, C, D LEDs indicate the state of the four-phase stepper motor when it is operatingEquipped with stepper motor standard interface, can be directly inserted when used. Wiring method:The left of the IN1 ~ IN7 corresponding to the single-chip 7 IO line;The right side of the white socket pin definition from top to bottom are VCC, A, B, C, D (then stepper motor common line, A phase, B phase, C phase, D phase); The bottom of the 2-pin pin GND ground, V + then +5 VDirectly into the microcontroller development board or system board can be used, need to draw from the development board 4 IO port, 5V and ground.The development board / system board and the motor drive board are connected by 6 DuPont linesDrive Module Board Size:2.8cm x 2.8cm x 2cm