Item specifics
-
Brand Name
Aideepen
-
Type
DC/DC Converters
-
Origin
CN(Origin)
-
Size
pls check descripition
-
Model Number
DC-DC Step Up board module
-
Output Frequency
pls check descripition
-
Output Type
Single
-
Output Power
1 - 50W
-
Weight
5g
-
is_customized
Yes
-
Output Current
pls check descripition
-
Input
0.9-3V / 0.9-5V
-
Type1
1V 1.2V 1.5V 1.8V 2.5V 3V to 3.3V
-
Type2
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V

Type1:0.9-5V To 5V step-up board green:
Specification:
Input Voltage: 0.9-5V, output voltage: 5V
Maximum Output Current: 480mA
Starting Up Voltage: 0.8V, output current: 7mA
Input Voltage: 1-1.5V, output voltage 5V, current 40-100mA
Input Voltage: 1.5-2V, output voltage 5V, current 100-150mA
Input Voltage: 2-3V, output voltage 5V, current 150-380mA
Input Voltage: >3V, output voltage 5V, current 380-480mA
Operating Frequency: 150KHz
Typical Conversion Efficiency:85%
Pin Space: 2.54mm
Size: 11*10.5*7.5mm
Notice:
1.Input voltage should be no more than rated voltage,or the module will be burnt
2.Input power should surpass output power,or output voltage will be less than rated voltage
3.Output load should be no more than rated load,or output voltage will be less than rated voltage
Package Included:
1 * 1.8V 2.5V 3V 3.3V 3.7V To 5V DC-DC Step-Up Power Voltage Boost Converter Board
Type2:0.9-3V To 3.3V step-up board green:
Description:
Input voltage 0.9 ~ 3.3V, output 3.3V
Maximum output current: 500MA,
Starting voltage 0.8V, output current 10MA
Input 1-1.5V, output 3.3V 50-110MA;
INPUT 1.5-2V, output 3.3V 110-160MA;
Input 2-3V, output 3.3V 160-400MA;
INPUT is higher than 3V, output 3.3V 400-500MA;
DC-DC boost module working frequency is 150KHZ. The efficiency is normally 85%.
2.54mm pin pitch, Arduiuo breadboard friendly.
Excluding pin size 11mm x 10.5mm x 7.5mm (very small)
Weight: about 1.2g (very light)
Application:
For Battery-powered equipment
Line module, NRF24L01 CC1101 CC2500, etc.
Development board, FPGA / CPLD STM32
For Ardiuno_uno mega2560 Breadboard for Raspberry Pi
VCR
PDA
LED lighting
Wireless communication equipment
MP3 / MP4 player
Audio equipment
Note:
This is a DC-DC voltage converter module, you must pay attention to it when using:
1 The input voltage cannot be greater than the maximum input range
2 The output power cannot be greater than the maximum load for a long time
3 The input power must be greater than the output power, because the power consumption of the module itself
Package Included:
1 * DC-DC converter 1V 1.2V 1.5V 1.8V 2.5V 3V to DC 3.3V boost boost power supply
Type3:0.9-5V To 5V step-up board blue:
Specification:
1.The module uses high - performance chip, the performance is better than the general module.
2. Input 0.9V ~ 5V any DC voltage, can be stable output 5V DC voltage, with a single AA battery can output up to 200 ~ 300MA current, two AA batteries can output 500 ~ 600MA current, can Power your phone, camera, microcontroller and digital products
3. Industrial temperature range: -40 Celsius --- +85 Celsius
4. High conversion efficiency, up to 96%
5. With USB female base, widely used
6. Ultra-small size (PCB board 35mm * 16mm), with a variety of small equipment installed
7. With work light
Use:
1.DIY mobile power: when you travel or travel always feel that your phone, MP3, MP4, PDA, PSP is not enough electricity, and you have extra battery, you can consider their own DIY a mobile power; This module with your [a lithium or 2-3 Ni-MH] can output 5V voltage for your mobile phone, MP3, MP4, PDA, PSP charge, very simple and convenient Oh.
2. Adjust the voltage: If you need a different voltage in the product design power supply, the device needs 5V power supply, that use our module will be your best choice.
3. Power supply: When your power supply is very unstable, when the high and low, but when your device needs 5V power supply, that use our module will be your best choice.
4. Does this power module have short circuit protection? I used to accidentally enter the short circuit will burn it?
5: No short circuit protection, if you need short circuit protection, please install the fuse in series at the input.
         
|