Tactical Scope Mount Weaver base for IZH-27 /  MP-153 / MP-155 / MP-233 / TOZ-120 / MTs21-12 VI05082

Transition plate is designed to create a seat standard Weaver on ventilated aiming rails IZH-27, with a width not exceeding 8.2 mm The bar is designed for mounting collimator sights, the weight of which should not exceed 400 g. This bar is the most compact, the Weaver is 55 mm long. Transitional Weaver bar on a ventilated MINI bar is made in china, The material of manufacture is steel or Alloy Aluminium.
  The principle of installation consists in transverse blades that pass through the holes in the ventilated plate and are attracted by two screws. On the sides of the transition bar has 2 pins, providing additional fixation. The bar is designed for mounting collimator sights, since any installation on ventilated aiming bars should not exceed 400 g in weight and the Weaver footprint is only 55 mm. Tightening screws during installation go deep into the mount and do not interfere with the installation of the collimator, thereby completely the upper surface of the strap is the seat.
One of the important characteristics of the mounting is the width of the ventilated strip. Width should not exceed 8.2 mm. This plate is suitable for such guns as IL-27, MP-153 and analogues. Due to the fact that the bar is installed over the ventilated, the open sight is blocked. But it does not matter when installing the collimator sight.
 
Specifications

    Width of the ventilated level no more than 8 mm wide
    Type, weaver rail mounting dimensions, 21 mm
    For the IZH-27, MR-153/155, MP-233, TOZ-120, MTs21-12, TOZ-84 carbine,Remington 870,12GA,2000,cz mallard,mp-27,the hatsan escort magnum 12 caliber on the ventilated bar fits perfectly,very good thing on ios 27 vertical became excellent keeps well.

Customer Share: