- 0Carrito
-
Su carrito está vacío.
-
más artículos en el carro...
Carro Total: $0.00
Pasar por caja
Su carrito está vacío.
Carro Total: $0.00
Pasar por caja
|
Item specifics
Product Description
Bundle 1 = + + + + Pi 3b+ ABS Case Fan Power Heat Sink ------------------------------------------------------------------------------------------------------------------------------------------------------ Bundle 2 = + + + + + + Pi 3b+ ABS Case Fan Power Heat Sink 16G SD HDMI Cable ------------------------------------------------------------------------------------------------------------------------------------------------------ Bundle 3 = + + + + + + Pi 3b+ ABS Case Fan Power Heat Sink 32G SD HDMI Cable ------------------------------------------------------------------------------------------------------------------------------------------------------ Bundle 4 = + + + + + Pi 3b+ ABS Case 3.5 inch LCD Power Heat Sink 32G SD Please leave a message for which power adapter and case do you need, write in your order page. Power adapter : EU US UK AU ABS Case : Black Clear White Gray Raspberry Pi 3 Model B+ This is original Raspberry Pi 3 Model B+ starter kit, new upgrade based on the Raspberry Pi 3, but better than Raspberry
Pi 3, complete kit accessories to get you started Immediately! The device can be a desktop computer, a media player, learn programming, Retro Gaming Machine, Robot Controller, an inexpensive way to get more experience with Linux based systems, be used in school or college setting for educational use and more endless possibilities. All in all, it is a funny kit for your friends and family or a great graduation gift. Specification: 1. Broadcom BCM2837BO 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.4GHz 2. 1GB RAM - BCM43143 WiFi on board 3. Bluetooth Low Energy (BLE) on board 4. 40 pin extended GPIO - 4 x USB2 ports 5. 4 pole Stereo output and Composite video port 6. Full size HDMI 7. Upgraded switched Micro USB power source (now supports up to 2.5 Amps.) 8. CSI camera port for connecting the Raspberry
This LCD Module need install driver first.
Step 1:Download the Raspbian IMG https://www.raspberrypi.org/downloads/raspbian/
Step 2: Burn the system image If you don't know how to do that,you can refer to the Raspberry Pi office tutorial
Step 3: Open terminal(SSH) and install the driver on RaspberryPi (tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)
Run: sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./LCD35-show Wait A Few Minutes, when the system reboot ok, you can see that.
|