The customer who buy this product also pay attention to these products :

Raspberry Pi 3 Model B+ Camera Kit 5MP Focal Adjustable Night Vision Camera+Holder +IR Lights+FFC Cable for Raspberry Pi Zero W/1.3

Introduction :

This is a raspberry pi camera kit , include night vision focal adjustable camera , IR sensor lights , acrylic holder , camera cable for both Raspberry Pi 3 Model B+ / 3 / 2 and Raspberry Pi Zero , you can use it to Raspberry Pi 3 Model B+ / 3 / 2 or Raspberry Pi Zero W/1.3 just by change the camera cable . And we prepare the small screw driver for you to install the camera more conveniently . The acrylic holder is specially for this camera , which is small but useful .

Features :

1. Supports all revisions of the Raspberry Pi 

2. Night vision camera. If you want the night vision function , must install the 2 infrared led lights .

3. Can access sensitive lights . Four screw holes can be installed sensitive infrared light or other fill light , you can switch freely , no longer worried about the light is too weak, underexposed sensitive infrared light

4. Focal adjustable (manually)

5. Use for both Raspberry Pi 3 Model B+ / 3 / 2 and Raspberry Pi Zero W

​6. When use in daylight , to get a better effect , you can use the camera without IR light .

Specification :

1. OV5647 sensor

2. Pixel 5 megapixel

3. Lens : 1/4 5M

4. CCD size: 1 / 4inch

5. Aperture (F): 1.8

6. Focal Length: 3.6mm adjustable

7. Diagonal angle: 60 degree

8. Sensor best resolution: 1080p

9. 4 screw holes : used for attachment and connect power ( 3.3V output )

10. Dimension: 25mm x 24mm

11. Metal frame

12. 3.3V power supply interface can be accessed sensitive infrared lamp or other device

13. Transparent lights for 1W high power infrared light photoreceptor 850

14. Photoresistor : detecting ambient light intensity

Package list :

1 x Night Vision Camera 

2 x IR Lights

1 x Acrylic Holder

1 x 15 cm Raspberry Pi 3 Camera Cable

1 x 50 cm Raspberry Pi 3 Camera Cable

1 x 30 cm Raspberry Pi Zero Camera Cable 

1 x Screw Driver

( not include Raspberry Pi )

Effect Picture:

Using steps:

2. Then select: Enable

3. Then the system return to the interface itself. Choose the “Finish “ , it will restart , If it doesn't restart itself , please restart it manual  ( by yourself )

4. After the raspberry pi system restart , you can use raspberry pi camera now.

If you want to take photo, you can run the command : raspistill

For example,input: raspistill –t 2000  -o 1.jpg
-t: ( the time of waiting to take the photo ,5000 is five seconds). – o 1.jpg (1.jpg is command of file)

Tip: