Color	1 Button Transmitter 1 Receiver Only 2 Button Transmitter 3 Button Transmitter
1 Button Transmitter 1 Receiver Only 2 Button Transmitter 3 Button Transmitter

Description
Customer Reviews(0)

Item specifics

Use: Electric Door,Automated curtains,Lighting,Switch,Universal
Wireless Communication: RF
Model Number: 433Mhz 86 Wall Panel Wireless Remote Control RF Transmitter WP 1 2 3
Package: Yes
Channel: 1
Frequency: 433 MHz
Support APP: No
Brand Name: QIACHIP
Working Current: 10 mA
Distance: Up to 30 Meters
Application Example 1: Mando a Distancia
Application Example 2: Garage Doors Access Control System
Application Example 3: Heating Systems Control
Application Example 4: Electronic Gates Access Control System, Electrical Appliances Control
Application Example 5: Led Light Lamp Switch, Home Security Alarm System
Application Example 6: Car Sunroofs Control, Mando Garaje
Application Example 7: For 433Mhz RF Receiver 1527 EV1527 Learning Code Button

Product Description

~Authentic~ Product Description

Wall Panel Transmitter:

Operating Frequency: 433MHz

Battery Model: CR2032 (Package Not included battery) Dimensions: 86mm x 86mm x 13mm Distance: indoor (20 meters) outdoor (80 meters) Technical Data Of Receiver: Input Power: AC 85V - 250V Standby Current: <5MA RF Frequency: 433MHZ RF working mode: Superheterodyne Receive sensitivity: >97dbm Transmitting distance: 20-50m ( open space) Decoding mode: MCU software decoding Remote storage: 20pcs Support remote type: Learning code 1527Code Working mode: Momentary, Toggle,Latching Dimension of PCB: 53.8*31.2mm Notice: The package Included different products because you choose a Different options. Package List 1: 1Pcs * 433MHz 1 Gang Wall Panel Remote Control (No Include Battery)

Package List 2: 1Pcs * 433MHz 2 Gang Wall Panel Remote Control (No Include Battery) Package List 3: 1Pcs * 433MHz 3 Gang Wall Panel Remote Control (No Include Battery) Package List 4: 1Pcs * 1 CH Receiver Module (Include Shell)

Operation Introduction: About Working Mode: Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects. Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects. Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect. Clearing the Code: Press the Learning Button on the receivers for 8 times, the codes will be cleaned. After cleaning the code, all the remote control cannot work any more. Learning the Code:(Momentary) Press the learning key on the receiver once time, it comes into momentary setting mode. Wait for a moment, the LED will be off , it comes into learning state. Push the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully. Learning the Code: (Toggle) Press the learning key on the receiver twice time, it comes into toggle setting mode. Wait for a moment, the LED will be off , it comes into learning state. Press the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully. Learning the Code:( Latching) Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF. For example: Button A = ON, Button B = OFF Press the learning key on the receiver triple time, it comes into latching mode . Wait for a moment, the LED indicator on the receiver board will flash then come off. Press the remote button A. LED flash for 5 times. Press the remote button B. LED flash for 5 times After 3 seconds, the LED indicator will be on again, learning successfully. A = ON, B = OFF. 2201

Instructions: The first step : Clear the receiver's memory Press the Learning Button on the receivers for 8 times, the codes will be cleaned. After cleaning the code, all the remote control can not work any more. Step Two : Match Wall Panel Remote Transmitter and Receiver Press the learning key on the receiver twice time, it comes into toggle setting mode. Wait for a moment, the LED will be on , it comes into learning state. Press the remote button, LED indicator on the receiver board will flash then come off. Learning successfully.

rule110