Fashion Accessories & Bags- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
 Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller Features: 1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system; 2. 14 PWM / servo output; 3. Bus interface (UART, I2C, SPI, CAN); 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe; 5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights; 8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data; Specifications: Microprocessor 1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit 2. frequency: 168MHZ, 256K RAM 3.32 STM32F103 backup coprocessor Sensor 1.L3GD20 3-axis digital gyroscope 16 2.LSM303D 3-axis accelerometer 14 / Magnetometer 3.MPU6000 6-axis accelerometer / magnetometer 4.MS5611 precision barometer Interface 1 .5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible inputs and outputs 5.PPM Signal Input 6.RSSI (PWM or voltage) Input 7.I2C 8.SPI 9.3.3 and 6.6VADC input 10. External MICRO USB Interface NOTE: Before connect with the computer, you need to insert the SD card first , then flash the program, otherwise the LED indicator will not light up. Please make sure you read these wikis and videos before you use. And did not just connect then say "LED Indicator not flash" or not calibrate well then open dispute. Packing list: (full set as your choose) Pixhawk 2.4.8 32bit ARM Flight Controller x 1 anti-vibration Shock Absorber Board x1 Safety button and buzzer x 1 RGB x 1 4G card (IO firmware has written) x 1 Neo-M8N Gps Module x 1 Black Gps Holder x 1 Power Module x 1 ( yellow and black color XT60 connector PM send at random） Minim OSD w/ shell x 1 ( 2 kind of OSD cable send at random) I2C Splitter Expand Module x 1 PPM Module w/ shell x 1 433/915 MHZ telemetry x 1 ( send as your choice) 6pin turn 6pin cable x 1 4pin turn 4pin cable x 1 3pin DuPont line x 1 Note: If you need standard PIXhawk 2.4.7(upgrated Pixhawk v2.4.6) which have full function and use in best material. please choose at here: https://www.officematics.com/store/product/Pixpilot-v2-4-6-Pixhawk-PX4-open-hardware-Autopilot-Flight-Controller-I2C-RGB-PPM-Neo-M8N/727847_32316396160.html?spm=2114.12010615.0.0.382e7c0cu7rQOe https://www.officematics.com/store/product/Pixhawk-PX4-Autopilot-PIX-2-4-5-32-bit-ARM-Flight-Controller-for-RC-Multicopter/727847_32222334441.html?spm=2114.12010615.0.0.382e7c0cwRNCwg DSC_0067 DSC_1020 DSC_1021 DSC_1022 DSC_0550 DSC_0548 DSC_0549 HTB1V.lsKFXXXXXIXFXXq6xXFXXXa Pixhawk-Flight-Controller-Passive-Buzzer Only Pixhawk 2.4.8 mainboard set package included: Pixhawk 2.4.8 32bit ARM Flight Controller x 1 Safety button and buzzer x 1 4G card (IO firmware has written) x 1 I2C Splitter Expand Module x 1
Average rating:5 ( 0 reviews )
Write a review
|
