Latest Raspberry Pi 3 Model B+ 3.5 inch Touchscreen 480*320 TFT LCD  + ABS Case Black Gray Box also for Raspberry Pi 3  

Please note that this link doesn't include Raspberry Pi board 

Introduction :

Sometimes you use the the Raspberry Pi with 3.5 inch touchscreen , but sometime you don't use them together. In this situation , you need a case which both suitable for Raspberry Pi alone or with 3.5 inch touchscreen. This is the reason we provide this new case -- for  the people use 3.5 inch screen more convenient: When you use the touchscreen , just remove the cover board and fan; When you don't use the touchscreen , you can use the cover and fan , which become a normal case.

Please note that you can't use the 3.5 inch touchscreen and cooling fan at the sametime !

Feature :

1. One case for two use :

​1). This case suport install 3.5 inch touchscreen , and need to remove the cover board and can't use the fan in this using way.

2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan. 

2. Full access for Raspberry Pi : 

We leave every hole for SD card , HDMI , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.

3. Support cooling fan :

You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi. ( You can't use the 3.5 inch touchscreen and cooling fan at the sametime ! )

4. Hange hole on the bottom :

We make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.

5. There is black , gray , white and transparent 4 color to choose.

6. How to install the 3.5 inch touchscreen :

1). Install the Raspberry Pi on the base board 

2). ​Please stick the pad on  the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed ) 

3). Install the cover board 

Specification :

1. Case Material : ABS

2. Case Weight : 41 g approx

3. Case Color : Black / Gray / White / Transparent

4. Screen : 3.5 inch / 480*320 / with touchscren function

5. Use for : Raspberry Pi 3 Model B+/3B/2B

About the system of 3.5 touch screen

The touch screen need to configure the driver for touch function , otherwise you can not use it by your own system.

Here we provide the method to configure for Raspbian system :

Step 1：Download the Raspbian IMG

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image

If you don't know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show

git clone https://github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./LCD35-show

Wait A Few Minutes, when the system reboot ok, you can see that.

You can also download the system image which we already configured well by following links :

1. for Raspberry Pi 3 :

https://mega.nz/#!vc4zjRRR!A9OMnL4tVjXUwH5Tt4T0ES2WxJyA4DGUg-gid_JHQVA

2. for Raspberry Pi 3 Modle B+ :

https://mega.nz/#!SQRl3BSS!ZwuE1VsoQSpUwHm2sa6zk1GPsU36M7793Q35NvdSYVY

or refer to configure it by this link :

https://github.com/goodtft/LCD-show

If you have any problem about the system , please