[Wiring instructions] The lower two feet enter and exit, and the side foot connects the negative pole or the overhead iron, mainly to turn on and off the upper lamp.

Features:

• 100% Brand New

• Size: 1.4 x 6.5cm (W x H) (Please see the dimension drawing)

• Input:12V 20A

• Switch Actuation Style: Rocker

• Widely use: can be use as a switch for various additional electric equipment inside&outside the car.(Such as Critical lights, chassis lamp, fog lamps, dome light.

Package Content:

• 1x led switch + suitable cover

•  

• 

• Application Introduction 1. Racing car ignition switch, special for racing cars, controls the ignition of your car, reduces the impedance of power supply, improves the ignition efficiency, starts faster, and increases the sensitivity of your car. 2. The switch is easy to install and operate. During the installation, please ask the professional for guidance or installation. 3. In the critical moment, any angle down type power-off switch can quickly switch on and off the ignition device. 4.Application: start, ignition and brake control. Other examples (headlights, ceiling lights, etc.) 5. Installing the power-off switch can instantly cut off the power supply of the whole car, pursue the feeling of driving a racing car, and bring you unlimited driving fun.

• Warm tip: if you don't have a soldering iron to weld the switch foot (when welding, do not exceed 3 seconds, because the negative pole of the internal indicator light is also welded on the foot with tin wire. If the welding time is too long, the internal welding point will also melt off, resulting in the indicator light not on or poor connection), the following two switch feet will have unlimited welding time!