Item specifics
-
Flexible or Rigid
Rigid
-
Material
STEEL
-
Structure
Disc
-
Standard or Nonstandard
Standard
It is Steel No. 45, not stainless steel, it is a kind of iron, but it is harder than ordinary iron. The coupling length is 22mm There are two kinds of external diameter according to different apertures: 14mm, 16mm The rigid coupling is 90 degree fastening design, and is fastened by four machine screws. Pure copper material, aperture error is 0.03 mm (basically negligible), through-hole design, two aperture lengths each account for half of the coupling! Widely used in motor, hardware, mold, mechanical transmission occasions. Welcome to wholesale and custom! Size description: The following 6 kinds of couplings are 14mm in diameter and 22mm in length. 4-4, one side aperture 4mm, the other end aperture 4mm; (side hole M4 machine screw) 5-5, one side aperture 5mm, the other end aperture 5mm; (side hole M4 machine screw) 5-8, one side aperture 5mm, the other end aperture 8mm; (side hole M4 machine screw) 6-6, one side aperture 6mm, the other end aperture 6mm; (side hole M4 machine screw) 6-8, one side aperture 6mm, the other end aperture 8mm; (side hole M4 machine screw) 8-8, one side aperture 8mm, the other end aperture 8mm; (side hole M4 machine screw) The following 3 kinds of couplings are 16mm in diameter and 22mm in length. 6-10, one side aperture 6mm, the other end aperture 10mm; (side hole M4 machine screw) 8-10, one side aperture 8mm, the other end aperture 10mm; (side hole M4 machine screw) 10-10, one side aperture 10mm, the other end aperture 10mm; (side hole M4 machine screw)  |
Complementos Moda