TA88 Thermal Imager:

Features:
With the housing, you can use it directly, the sensor resolution is 24*32 dot matrix.
Built-in rechargeable lithium battery, Micro USB interface, interface voltage does not exceed 5V.
The response frequency is 8Hz, the target temperature measurement range is -40~+300℃, and the use environment is 0~50℃.
The emissivity can be adjusted from 0.1 to 0.99 range.
Sensor probe field angle, default 35 degrees*55 degrees MLX90640BAB probe.
2.4 inch LCD screen resolution is 320*240, the screen shows the highest temperature, the lowest temperature, the center point temperature, displays each coordinate point.
The measurement accuracy is ±2℃.
Camera function: built-in memory, you can take 100 photos. Once the Micro USB cable is connected to the computer, you can view, copy, and delete the images on your computer.
Can be applied to human body temperature detection, PCB component heating temperature detection, floor heating temperature detection, automotive parts temperature detection, electrical switch temperature detection, air conditioning and microwave oven detection, etc.

Specification:
Material: ABS
Color: black
Display: 2.4 inch color display, 320*240
Resolution: 32*24
Field of view: 35° * 55°
Temperature measurement range: -40℃~300℃
Measurement accuracy: ±2℃
Refresh rate: 8Hz
No calibration required
Emissivity: 0.1~0.99 adjustable
Battery: 1 * lithium battery, 1000mAh (included)
Charge time: about 2 hours
Power: Micro USB 5V/1A
Working temperature: 0℃~50℃
Item size: 160 * 56 * 25mm / 6.3 * 2.2 * 1.0in
Item weight: 119g / 4.2ounce
Package size: 180 * 100 * 30mm / 7.1 * 3.9 * 1.2in
Package weight: 121g / 4.3ounce

Package list:
1 * Thermal Imager

AMG8833 Thermal Imager:

Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life.

Features:
The module can be powered directly by USB 5V to produce infrared images.
Use AMG8833 infrared thermal sensor. The resolution is 8*8, and the farthest detection distance is 7 meters.
It can be applied to check electronic products.
Portable and compact, high performance, easy to use.

Specifications:
Material: PCB
Temperature accuracy:
High performance type high gain: typical ±2.5℃ ±4.5℉
High performance type low gain: typical ±3.0℃ ±5.4℉
Human detection distance: 7m or less (reference value) 22.966 ft
NETD:
Typ. 0.05℃ 32.900℉ 1Hz
Typ. 0.16℃ 32.288℉ 10Hz
Viewing angle: typical 60°
Optical axis gap: within typical ±5.6°
Current consumption:
Typical 4.5mA (normal mode)
Typical 0.2mA (sleep mode)
Typical 0.8mA (stand-by mode)
Setup time:
Typical 50ms (time to enable communication after setup)
Typical 15s (time to stabilize output after setup)
Number of pixel: 64 (vertical 8 * horizontal 8 matrix)
External interface: 1²C (fast mode)
Frame rate: typical 10 frames/sec or 1 frame/sec
Operating mode: normal, sleep, stand-by (10 sec or 60 sec intermittence)
Output mode: temperature output
Calculate mode: no moving average or twice moving average
Temperature output resolution: 0.25℃ / 32.45℉
Number of sensor address: 2 (1²C slave address)
Thermistor output temperature range: -20℃~80℃ (-4℉~176℉)
Thermistor output resolution: 0.0625℃ / 32.1125℉
Item size: 42 * 37mm / 1.7 * 1.5in
Item weight: 10g / 0.4ounce
Package size: 90 * 60 * 8mm / 3.5 * 2.4 * 0.3in
Package weight: 11g / 0.4ounce

Package list:
1 * AMG8833 Thermal Imager

UA99 Thermal Imager:

This is an infrared thermal imager that combines the functions of surface temperature measurement and real-time thermal imaging. The traditional thermal imaging camera needs to measure each component one by one, while this instrument does not need to. Therefore, it helps to save your time. Even the potential problems can be clearly displayed on the color screen which helps users quickly locate the central point to measure cursor and temperature.  

Features:
TFT Full View Color Screen: potential problems can be clearly display on the color display screen, which help to locate the center point to measure the cursor and temperature quickly and accurately.
Resolution of Infrared Image/Visible Image: 1089 pixels/300,000 pixels.
Time Saving: Dual MCU processors, combine the functions of surface temperature measurement and real-time thermal imaging, refresh faster, no need to measure each component one by one.
Hybrid Imaging of Visual and Infrared Images: equipped with a vision camera to improve recognition, which turn thermal image into visual image, quickly find out the problem area.
Images Capture Saved in Storage Card: thermal image and visual image can be stored in the dismountable memory card(NOT included) for generating reports and printing.
Selectable Color Palette: ink color, black and white, rainbow color, ocean blue, iron red.
Hot/Cold Spot Marked: hot and cold point temperature markers guide users to the areas with the highest and lowest temperature in the thermal image.

Specifications:
Material: ABS
Temperature Range: -20~380°C / -4~716℉
Accuracy: >0°C, ±2% or reading ±2°C/3.6℉; <0°C, ±3°C/5.4℉ (measured in an environment of 18~28°C)
Infrared Image Resolution: 33*33 (1089 pixels)
Display Resolution: 240*320 pixels
Visual Image Resolution: 300,000 pixels
Field Angle: 32*32 degrees
Minimum Focal Length: 0.5m
Thermal Sensitivity: 0.15°C/0.27℉
Emissivity: 0.1~1.0 adjustable
Image Capture Frequency: 9Hz
Wavelength Range: 8~14um
Focus Mode: Fixed
Palette: Ink color, black and white, rainbow color, ocean blue, iron red
File Format: BMP
Storage: 8GB memory card(NOT included)
Memory View: Scroll all saved images and view them on the screen
Auto Power-off: 3 minutes, 5 minutes, or 10 minutes