Color	LCD with Black Case LCD with Clear case LCD with Gray Case LCD with White Case
LCD with Black Case LCD with Clear case LCD with Gray Case LCD with White Case

Descripción
Comentarios de clientes(0)

Item specifics

Accessory Type: LCD Screen
Compatible With: Raspberry Pi 3B+/3
Brand Name: SHCHV
Case Material: ABS Plastic
Case Color: Black/Gray/White/Transparent
Screen Size: 3.5 inch TFT
Resolution: 480*320

Product Description

Raspberry Pi 3 Model B Plus 3.5 inch TFT Touch Screen LCD Display with New ABS Plastic Case with 4 Colors for Raspberry Pi 3

Note: When you use the screen with the case, please remove the top piece, the screen and cooling fan can't be used at the same time. Raspberry Pi is not included. Introduction: This is new designed ABS case with 3.5 inch screen kit, suitable for Raspberry Pi 3 Model B+ and Raspberry Pi 3B. It is easy to install the case with screen and Raspberry Pi. We provide 4 colors for the case.You can use the case with only Raspberry Pi, and you can also use the case with Raspberry Pi and the 3.5 inchscreen, but you need remove the top piece when you use 3.5 inch screen. About the case.

1. Dual use :

1). This case support to install 3.5 inch touchscreen , and need to remove the cover board and fan in this using way. ( You can notinstall the 3.5 inch screen and fan at the same time )

2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.

2. Full access for Raspberry Pi :

We leave every hole for SD card , HDMI , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.

3. Support cooling fan :

You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi. (You can not install the 3.5 inch screen and fan at the same time )

4. Hange hole on the bottom :

We make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.

5. Multiple colors available :

There are Black / Gray / White / Transaperent color to chose for the case .

6. About the pad - use to support the screen

1). Install the Raspberry Pi on the base board

2). Please stick the pad on the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )

3). Install the cover board

About the 3.5 inch screen. 1. 480*320 resolution 2. The screen is TFT screen, has touch function 3. Perfect size for Raspberry Pi This LCD Module need install driver first.

Step 1：Download the Raspbian IMG

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image

If you don't know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show

git clone https://github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./LCD35-show

Here are system image we configured well, you can download. 1. for Raspberry Pi 3: https://mega.nz/#!vc4zjRRR!A9OMnL4tVjXUwH5Tt4T0ES2WxJyA4DGUg-gid_JHQVA

2. for Raspberry Pi 3B+:

https://drive.google.com/open?id=1E8u7hUHfwypc9eUGHFPCXX2cWjCGD3RW

If you want to configure the system image by yourself, please refer to this link.

https://github.com/goodtft/LCD-show