Description :

New upgrades to simplify,to meet customer needs.

Increase the supply anti-reversefunction.

The use of opto isolated input and output,enhanced anti-jamming capabilit
consumption.

Set parameter after power for ever memories.

Signal terminal voltage signal can be maintained for a longtime.

to ensure stability,industrial grade board,class PLC.
Product parameters:

Size:64.2mm*34.8mm*18.5mm.

Relay Specifications:AC 220V 10A or DC 30V 10A.

Quiescent Current:20mA,Operating Current:50mA.

Working voltage:10~16V (if other ranges can be customized).

Signal voltage:4V~20V (if other ranges can be customized).

life:about100,000times,Working temperature:-40~85'C.

selection:After power on,long press K12 seconds later into the select function mode,P1-1~P1-4forchoose.
P1-1 operating modes:a signal to trigger relay, time is up,the relay
disconnect users,You can set relay time T,click K2 the hundreddigital
tube starts flashing,then press K3, the hundred digital change;click K2
ten digital tube starts flashing,then press K3,ten digit changes;click K2
bit digital tube starts flashing, then press K3, single-digit change;then
click K2,; digital pipe does not blink,then press the K3, shifting the
decimalpoint,the decimalpointin abitindicates 0-999minutesin ten
represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999
seconds;goodchoice,bringing the time setting is completed.Short press
K1,enterfunction offine-tuning settings,triggerthedefaultdelayperiod
is invalid, press K1, during the delay trigger active(re-timing),clickon
the K1, during the delay reset (timer turned off,the relay reset) press
again to repeat the default settings for the first time.
P1-2 operating modes:Asignal trigger ,digital countdown begins,X
seconds after,there lay open Y seconds,then close.Users can set the relay
time X,Y;P1-1different time settings similar to the blue lights that set
the relay time,blue light indicates setting relay off time. Short press K1,
enter function offine-tuning the set,the default trigger is invalid during
the delay,pressK1,during the delay trigger active(re-timing),then click
the first repeat default settings.
P1-3 operating modes:Open X seconds,disconnect Yseconds, infinite
loop.Users can set the relay timeX,Y;time setting similar to P1-2.Short
press K1,enter function offine-tuning set,The default function is:set up
an electric circuit the relay first open, press the K1,there lay first
close.Press again to repeat the default functionality.
P1-4 operating modes:a signal to trigger the relay open but do not start
the timer,when the trigger signal disappears,digital count down begins,X
time after,the relayclose; During the delay,again to the signal,digital
count down canceled, stays energized, the signal disappears, restart
count down; (equivalentto release the button to start timing, commonly
usedin power-offdelay).Users canset the relay time X; time setting similar to P1-1.

Highlights:

Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;

The interface is clear and simple, powerful, easy to understand, meet almost all your needs;

The emergency stop function (“STOP” key);With reverse polarity protection, reverse polarity will not burn the product.

Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;

You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;

After the module is powered down, all parameter settings are not lost.

Product parameters:

1: Operating voltage: 6--30V, support microUSB 5.0V power supply

2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground).

3: Output capability: You can control the DC 30VDC 5A or  220VAC 5A device.

4: Quiescent Current: 20mA; Operating Current: 50mA

5: life: more than 10 million times; Working temperature: -40-85 ; Size:

6: with optocoupler isolation, enhanced anti-jamming capability, industrial grade board.

Special Note: The relay outputs are passive contact, just a switch.

100% brand new and high quality

Material: Electrical components

Color: See the pictures

Working voltage: DC12V (normal operating voltage DC10V-16V)

Source: DC4V ~ 20V (positive trigger common power button, PNP sensors, PLC signals, etc.)

Output capability: You can control the DC or AC 220v5A within 30v5A within

Quiescent Current: 20mA,

Working current: 50mA

Life: more than 10 million times;

Working temperature: -40 ~ 85'C;

Features:

anti-reverse voltage input circuit, worry-free wiring. Signal input optocoupler isolation, anti-interference ability.

Set the parameters of power and permanent memory. Powerful flash MCU online programming capabilities, according to user needs can contact the manufacturers to customize the functionality.

S1: power on, press S1 2 seconds to enter mode selection menu, press S1, choose P-1 ~ P-4 mode.

S2: OK / Shift key: Press to adjust the position of the LED is blinking, which LED is blinking, S3 to adjust the value of digital tube flicker.

Until you press S2, the digital is no longer flashing.

S3: digital display flashes, S3 adjustment digits from 0-9 successively changed. Normal digital tube display, S3 to adjust the position of the decimal point, the decimal point in bits 0-999 minutes; in 10 bit from 0 to 99.9 seconds; no decimal point indicates 0-999 seconds.

Model Description:

P-1: triggering signal is received, the relay is turned on, the timer expires, the relay off.

A1: During the delay trigger again invalid

A2: During re-timing delay trigger again

A3: Delay trigger again during termination timing relay reset

P-2: triggering signal is received, X start time, the end of counting relay, Y start time, the end of counting the relay off

P-3: Cycle Switch Mode

A1: After power relay is turned on, the end of the timing off, an infinite loop.

A2: After power relay is off, the timing turned end, an infinite loop.

Size: See the picture

No retail packag

Quantity: 1Pc

Product Name: Programmable timer relay module

Working voltage: DC12V (normal operating voltage DC10V-16V)

Source: DC4V ~ 20V (positive trigger common power button, PNP sensors, PLC signals, etc.)

Output capability: You can control the DC or AC 220v5A within 30v5A within

Quiescent Current: 20mA,

working current: 50mA

Life: more than 10 million times;

Working temperature: -40 ~ 85'C;

Weight: about 26g

Dimensions: 64.2mm * 34.8mm * 18.5mm

Features: anti-reverse voltage input circuit, worry-free wiring. Signal input optocoupler isolation, anti-interference ability. Set the parameters of power and permanent memory. Powerful flash MCU online programming capabilities, according to user needs can contact the manufacturers to customize the functionality. 

Features:

Receives a trigger signal to start the countdown, while the relay, timing the end of the relay to stop working, time to recover to the set, waiting for the next trigger.

Instructions:

Click K1 enter the time setting, one hundred digital start flashing, then press K2, one hundred the number of changes; then click K1 ten digital start flashing, then press K2, the tens digit changes; then click K1 bit digital start flashing, then press K2, single-digit change; then click K1, exit the setting, LED no longer flashes.

Normal digital tube display, press K2, shifting the decimal point, a decimal point indicates 0-999 minutes in 10 bit from 0 to 99.9 seconds with no decimal point represent 0-999 seconds; to this time setting is completed.

Seleccione una clasificación para este artículo. 1 estrella es las peores y 5 estrellas es el mejor.

Por favor, dinos lo que piensas y compartir sus opiniones con los demás. Asegúrese de que sus comentarios se centran en el producto.

NOTA: No se permiten etiquetas HTML.

Copyright (c) 2026 Officematics.com.