Complementos Moda- 0Carrito
-
Su carrito está vacío.
-
más artículos en el carro...
Carro Total: $0.00
Pasar por caja
|
Item specifics
Product Description
Duplicator CAME TOP432NA 433.92mhz remote control (with battery) Duplicate Your Existing Remote Control , such as CAME TOP-432NA , and some common fixed and learning code remote controls. High quality compatible with CAME TOP-432NA ,CAME TAM 432SA 1. Vehicle central locking systems 2. Garage doors 3. Electronic gates 4. Electrical appliances/Home automation i.e. lights 5. Car sunroofs 6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage. Specifications: Operating frequency: 433.92MHz Power by 27A 12V battery (Battery included ) Weight:33g Size: 55mm x 28mm x 14mm Distance: Up to 100 meters Package included: 1 x RF 433Mhz Remote Control (Battery included) IMPORTANT NOTE: This item is only 1 piece remote control can clone "CAME TOP432NA", just a duplicator ; does not included "CAME TOP432NA" This items send out without retail Package ,but we will pack it well before shipped out.
How to Program (it's easy!):
Step 1 –delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted !
Step 2 - clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
How to use(How to Program)
On this product details page there is a video (demo to use),
but you have to use the computer to see it, you can not see it using your phone.
You can also see the video at this URL: https://youtu.be/jKkdHoNSuJk Please use the correct method of use. Step1 – delete the existing code of our remote duplicator 1) Press and Hold “A” and “B” buttons together - Led will flash 3 times 2) Keep holding “A” button and release “B” button 3) Keep holding “A” button and push “B” button 3 times, Led will start flashing Non-stop (Please note: during the deletion procedure, make sure to keep the “A” button pressed the whole time) Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted ! Step2 - clone your original remote 1) Put both remotes into "back to back" position. Make sure they have direct contact. Or the two remote controls should be placed as closely as possible (put the two remote controls on the desktop side by side with zero distance) 2) Press and hold one button on your original remote and one button on your clone remote. Keep holding until LED will make 2 blinks (Note: LED 2 blinks not to release button) Then 3 blinks then into steady and you have successfully cloned. ( other buttons follow the same above operation) If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.
|
