Color	Black white
Black white

Descripción
Comentarios de clientes(0)

Item specifics

Use: Universal,Electric Door
Wireless Communication: RF
Model Number: RUIXINYU-432B
Package: Yes
Channel: 4
Frequency: 433 MHz
Brand Name: RUIXINYU
battery: 27A12V(include)
Use method: face to face copy
Distance: Up to 100 meters
Use range: garage door,gate,ect
Duplicator for: CAME
Compatible 1: CAME TOP-432NA
Compatible 2: CAME TOP-432EV
Compatible 3: CAME TAM-432SA
Compatible 4: CAME TOP-432M
Compatible 5: CAME TOP-432S

Product Description

Duplicate Your Existing Remote Control , such as CAME TOP-432NA , CAME TOP-432EV and some common fixed and learning code remote controls. High quality compatible with CAME TOP-432M ,CAME TAM-432SA ,CAME TOP-432S 1. Vehicle central locking systems 2. Garage doors 3. Electronic gates 4. Electrical appliances/Home automation i.e. lights 5. Car sunroofs 6. Car/Motorbike alarms Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage. Specifications: Operating frequency: 433.92MHz Power by 27A 12V battery (Battery included ) Weight:45g Size: 58.7mm x 30mm x 14mm Distance: Up to 100 meters Package included: 1 pcs x RF 433Mhz Remote Control (Battery included) Note : This items send out without retail Package ,but we will pack it well before shipped out.

How to Program (it's easy!): Step 1 –delete the existing code of our remote duplicator 1)Click and Hold A and B buttons together - Led will flash 3 times 2)Keep holding A button and release B button 3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted ! Step 2 - clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.