Color	1 Receiver and 4 RC 1 Receiver Only
1 Receiver and 4 RC 1 Receiver Only

Descripción
Comentarios de clientes(0)

Item specifics

Use: Electric Door,Automated curtains,Lighting,Universal
Wireless Communication: RF
Model Number: KR2202-4
Package: Yes
Channel: 2
Frequency: 433 MHz
Support APP: No
Brand Name: angry monkey

Product Description

433Mhz Universal Wireless Remote Control Switch AC 250V 110V 220V 2CH Relay Receiver Module and 4pcs RF 433 Mhz Remote Controls

Order Package Include:(2 order model can be chosen) Order Model 1: 1Piece KR2202-4 and 4 Remote Controls Details: Receiver Switch Module (KR2202): 1 Piece with Plastic Shell Remote Control: 4 Piecese with Battery Order Model 2: 1Piece KR2202-4 Details: Receiver Switch Module (KR2202): 1 Piece with Plastic Shell Please note that: The color of the default shipment is shown in the figure. If you need another color, please contact customer service. Technical Data: Input Power:AC 85V-250V Standby Current:<8.5MA RF Frequency: 433M RF working mode: superheterodyne Receive sensitivity: > 97 dbm Transmitting distance: More than 15 meters Decoding mode: MCU software decoding matches Transmitters: 1-20 Piecese Support remote type: Learning code （1527） Switching Modes: Both Momentary & Toggle Wiring type:fixed terminal Switch Output : normally open & normally closed. Dimension of PCB (L,W,H) 35*30*18mm 1 3/8 * 1 3/16 * 11/16" Switch Output: NO: normal open COM: common NC: normal close

Wire port :

NO: normal open

COM: common

NC: normal close

HOW TO USE:

On this products details page, there is a demonstration video available.

You can also see the video at this URL: https://youtu.be/k06q76qthBw Working Modes explanation: Momentary Mode: Push the remote button , the relay activates, release the remote button the relay deactivates. Toggle Mode: Push and release the remote button , the relay activates. Push and release the remote button again and the relay deactivates. Clearing All Stored Transmitters: **Note** After clearing the stored transmitters, all transmitters will need to be relearned by the receiver. Push the learning button on the receiver 8 times , and the codes will be cleared . Learning the transmitter :(momentary Mode) Programing a 2 button transmitter as momentary mode transmitter. STEP 1 Push and release the learning key on the receiver ONCE. Wait for a moment , the LED will turn off , indicating you entered the learning state. STEP 2 Push and release the first button on your transmitter, the LED on the receiver board will flash on then off indicating the button was learned. STEP 3 Press and release the second button, watching the LED go on and off again. Wait 3 seconds, the LED will turn on again , indicating system is ready for use. Learning the transmitter : ( Toggle Mode ) Programing a 2 button transmitter as toggle. STEP 1 Press and release the learning key on the receiver TWICE. Wait for a moment , the LED will turn off , indicating you entered the learning state. STEP 2 Press and release the first button on your transmitter, the LED on the receiver board will flash on then turn off. Indicating the button was learned. STEP 3 Next press and release the second button, watching the LED go on and off again. Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use **Notice** two button transmitters can only be used as toggle or momentary. One mode per 2 button transmitter. ( Please note: You let the control panel to learn the remote control, you must press the "A" and "B" button; Rather than just pressing one of them ) However you can program another transmitter in the other mode.

Please note