Item specifics
- Use: Electric Door,Lighting,Automated curtains,Switch,Universal
- Wireless Communication: RF
- Model Number: 220102 433Mhz AC 85V ~ 250V 110V 220V Relay 1CH Receiver Module
- Package: No
- Channel: 1
- Frequency: 433 MHz
- Support APP: No
- Working Voltage: AC 85V-250V
- Quiescent Current: 5mA
- Receiving Sensitivity: >97dbm
- Modulation Mod: ASK
- Matching Mode: Intelligent Learning code
- Working temperature: -30 ~ +80
- Shell: Yes
- PCB dimension: 53.8*31.2mm
- RF working mode: superheterodyne
- Maximum working current: <10A
- Application: Retractable Door, Garage Door, Electric Curtain Automobile Light LED
- Receiving range: Open space is more than 50 meters
433MHz Universal Wireless Remote Control AC 85V 110V 220V 1CH Relay Receiver Module 1 Button Remote Control for gate garage Light
Product Application Area
Remote control garage door Remote control house door Remote control Lamp Remote control curtains Remote control Gate and other remote control device
Package include
Order Package Include:(5 order model can be chosen)
Receiver module ( include Shell )
Remote Control (include battery )
Technical Data Product Type: Single Channel Remote Control Switch Encoding Type: Intelligent Learning Code RF Working Mode: Superheterodyne Reception Modulation Mode:ASK RF Frequency: 433MHz Working Mode:Momentary, Toggle and Latching Input Voltage: AC 85V~250V Quiescent Current: 5mA Receiving Sensitivity: >97dbm Remote Control Range: >50m (Free Space) Wired Connection Way: Fixed Wiring Pillar Output Terminal: NO,COM,NC NO: Normal Open(Output). COM:Common(Output). NC: Normal Close(Output). Color: Green(PCB Board), Black (Outside Shell) Circuit Board Size: 6.5 * 3.2 * 1.6cm/ 2.5 * 1.25 * 0.62in Circuit Board Weight:20g / 0.7oz Package Size:8.1 * 3.6 * 2.0cm / 3.1 * 1.2 * 0.78in Package Weight: 36g /1.26oz Products Display
Tips: All of our products are of high quality! If you have other needs, please feel free to purchase them in our store.
Click here to search more
Circuit Connection modes Operating Mode You can match the Remote Control with the Receiver Switch Module in 3 modes.
- Remote mode 1: Momentary Mode
Press and hold on one button -> ON; Release the button -> OFF
- Remote mode 2: Toggle Mode
Press one button -> ON; Press the same button again -> OFF
- Remote mode 3: Latched Mode
Press one button "A"-> ON; Press another button "B" -> OFF
Set Up
- Part 1: Delete the existing data about remote mode Note: When you receive our products, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about remote mode for the first application. Press the learning button on the Receiver Switch Module board 8 times , the existing data are deleted successfully.
- Part 2: Set up the Remote Mode
Remote mode 1: Momentary Mode
Press and release the learning button on the Receiver Switch Module board once. Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press and release one button on the Remote Control , the LED on the receiver board will flash on then off indicating the button was learned. Wait 3 seconds, the LED will turn on again, indicating system is ready for use.
Remote mode 2 : Toggle Mode
Press and release the learning button on the Receiver Switch Module board twice. Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press and release one button on the Remote Control, the LED on the receiver board will flash on then turn off , indicating the button was learned. Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use
Remote mode 3 : Latched Mode
Press and release the learning button on the Receiver Switch Module board triple. Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press and release one button "A" on the Remote Control, then press another button "B" , the on-board LED indicator will flash 5 times to inform that the setting of latched mode successful . The first pressed button "A" stands for ON , and the second pressed button "B" stands for OFF. Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use
On this products details page, there is a demonstration video available. *If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*
|
Complementos Moda