Item specifics
- Use: Electric Door,Automated curtains,Lighting,Switch,Universal
- Wireless Communication: RF
- Model Number: KR2202 garage remote control mando garaje
- Package: No
- Channel: 2
- Frequency: 433 MHz
- Support APP: No
- Working Voltage: AC85-250V
- Quiescent Current: 8.5mA
- Decoding: 1527
- RF working mode: superheterodyne
- shell: Yes
- Matching Mode: Intelligent Learning code
- Working temperature: -10 ~ +80
- PCB dimension: 68*47mm
- Modulation Mode: ASK
433Mhz Remote Control Switch for Light,Door, Garage Universal ac Remote AC 85V ~ 250V 110V 220V 2CH Relay Receiver and Controller
Product Application Area
Products can be used in lighting, garage doors, shutter doors, remote control curtains, DC motors, motor reversing. and many more
Package include
Receiver module *1PCS(Include shell)
1PC Remote Control Switch KR2202 and 1PC Remote Control (Included Battery)
1PC Remote Control Switch KR2202 and 2PCs Remote Controls (Included Battery)
1PC Remote Control KT05 (Included Battery) Kindly Note: Below 2 Characters of the Button Remote Control will be at random delivery. Thanks Technical Data
- Input Power:AC 85V-250V
- Standby Current:<8.5MA
- RF Frequency: 433M
- RF working mode: superheterodyne
- Receive sensitivity: > 97 dbm
- Transmitting distance: 20-100 m ( open space)
- Decoding mode: MCU software decoding
- Remote storage: 16 pcs
- Support remote type: Learning code (1527 encoding )
- Working mode: Momentary, Toggle
- Wiring type:fixed terminal
- Output Terminal :NO , NC , COM
- Dimension of PCB:68*47*26mm (L,W,H)
Products Display Tips： All of our products are of high quality！ If you have other needs, please feel free to purchase them in our store. Click here to search more Wiring diagram L(Live wire): Input 85V - 220V Live wire N(Neutral wire):Input 85V - 220V Neutral wire 1 NC:Normally closed Output 2 COM:Common port 3 NO:Normally open Output 4 NC:Normally closed Output 5 COM:Common port 6 NO:Normally open Output Circuit Connection modes Please Note: the Receiver Switch Module part have 2 ways of working mode.The OUTPUT signal has 2 Voltage Level. It decided by the INPUT of the COM pin.
Connect the COM to the Power Supply by AC 85-250V, the Output pin will create AC 85-250V Signal. Please check below diagram for better understanding.
Connect the COM pin with any other Additional Power Supply，the output will create the same Voltage signal as the Additional Power Supply. it can be Direct Current or Alternating Current. Decided by the Additional Power Supply. BUT, Please note: the additional Power Supply should be in the range of the Receiver Switch Module-(DC5-12V, AC 85-250V). Please check below diagram for better understanding.
Operating Mode You can match the Remote Control with the Receiver Switch Module in 2 modes.
- Remote mode 1: Momentary Mode
Press and hold on one button -> ON; Release the button -> OFF Details: Press one button (on the remote control) , the relay (on the receiver board) turn to switch-on ; Release the button, the relay turn to switch-off.
- Remote mode 2: Toggle Mode
Press one button -> ON; Press the same button again -> OFF Details: Press one button (on the remote control) once , the relay (on the receiver board) turn to switch-on ; Press the same button again , the relay turn to switch-off.
- Remote mode 3: Latched Mode
Press button "A" -> ON; Press button "B" -> OFF(at the same time another channel ON) Details: Press one button (on the remote control) once , the relay (on the receiver board) turn to switch-on ; Press the another button , the relay turn to switch-off( at the same time another channel ON ).
Set Up
- Part 1: Delete the existing data about remote mode Note: When you receive our products, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about remote mode for the first application. Press the learning button on the Receiver Switch Module board 8 times , the existing data are deleted successfully. After deleted the data, all the remote control cannot work any more.
- Part 2: Set up the Remote Mode
Set up : Momentary Mode
Press the learning button on the Receiver board once. Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press one button on the Remote Control , the LED on the receiver board will flash on then off indicating the button was learned.
Press another button on the Remote Control, watching the LED go on and off again. Wait 3 seconds, the LED will turn on again, indicating system is ready for use.
Set up :Toggle Mode
Press the learning button on the Receiver board twice. Wait for a moment , the LED will turn off , indicating you entered the learning state.
Press one button on the Remote Control, the LED on the receiver board will flash on then turn off , indicating the button was learned.
Press another button on the Remote Control , watching the LED go on and off again. Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use Set up : L atched Mode
Press the learning button on the Receiver board 3 times.
Press one button on the Remote Control,
Press another button on the Remote Control Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use On this products details page, there is a demonstration video available. *If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!* Please note
|
Complementos Moda