433.92 MHz wireless Copy Remote Control  With Battery  Garage Door Remote Control Backup Remote Key Clone 1527 PT2264  HT600 etc

Package Include:
 Copy Remote Control: 1 piece.

NOTE:
This remote control we provide, can write the original remote control code into it ,even you don't know what the code is. when the original remote control was lost or you want to make a back-up one, you can buy this "Copy remote control". the operation is very easy to general people .

The usage areas:

Remote control switch, anti-theft alarm device ,shutter door, electric retractable door,  garage door, sliding door, double door, car garment, car fender, Wi-Fi  socket, wireless doorbell, electric curtains, electric cars, motorcycles, LED remote control etc.

Copier remote control manual

The remote controller is a fixed frequency  free copy remote. It can copy all kinds of cars remote, remote control  of electric doors  windows remote and other remote control devices.

It has 3 functions:

1,copy

2, transmission

3, integration.

It is suitable for copying various codes and learning code remote controller.

The parameters and setting methods of the remote control are as follows:

【1】Features:

1, It can copy : 

2260(as,PT2260,SC2260,HS2260 LX2260,HX2260); 2262(as,PT2262,SC2262,LX2262,HS2262,HX2262), PT2264,PT2240(LX2240 LX2241 SCL2240),CS5211,1527( EV1527,HS1527,HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527),SMC918,AX5026,SMC926,AX5326-3,AX5326-4,

FP527,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F630 ULN2003.

​Note:

It can't copy original car remote control, two-way remote control and rolling code remote control (Rolling code chips start with HCS commonly, such as HCS200, HCS201, HCS300, HCS301, etc.)

【2】Electronics Features:

1. Voltage: DC 6V
2. Electric current: ≤8MA
3. Working Frequency: 433.92MHz
4. Modulation Mode: ASK
5. Transmission power: ≤10MW
6. Transmission distance: 50 -100 meters（open space without magnetic field）
7. Encoding type: copy (copy, self torture, self-learning type)
8. Working temperature: -20℃ ~ +80℃

【3】Steps and methods of use:

 1: Clear the code.

Press the key-A and Key-B at the same time for more than 2 seconds. the LED indicator will flash 3 times. then, Release Key- A, and hold to press the key-B. and then ,press and release 3 times Key-A when keep to press the Key-B.

The LED indicator will Flash Fast.

You can release all keys this time.  and press any key of the remote control to check: if the LED indicator do not response, that mean the Clear Code success. If the LED indicator turn on light when any key being pressed, it means the Clear Code failed.

You should repeat above steps to clear the code.

2: Copy

Please hold the original remote control (Which you want to make a copy) and the Copier( The remote control you buy from us) BACK TO BACK.

Then press the corresponding key of Both remote control (as ,Key-A of both remote control) at the same time for 2 seconds. the LED indicator will flash 2times, and one second later, The LED indicator will flash 3 times again, then it will be turn on light ( All the time ,keep the keys of both remote control being pressed)

Then you can release the 2 keys of both remote, the LED still is on light. That mean the first Key is copied.

Repeat above steps to copy the other keys.

After all the keys is copied, the Copier remote has the some remote functions as the original remote control.

3, Recovery

If you clear the code of this copier remote control by mistake, Press the KEY-C and KEY-D at the same time, The LED indicator will flash fast.

Then Release all the keys.  After that, press any key of the remote control, the LED indicator will turn on Light.

It shows, the code is recovered.

4, If one key is Invalid, and the other keys are functional. You can use a trick to make the invalid key work.

The operations are as following:

1: clear the code.

2: copy the invalid Key again. Do nothing about other keys.

3: Clear the code again.

4:DO the Recovery operation.

Then all the keys will be functional.

Matters needing attention:

1. If you want to make a copy of yours remote control , please note:the original remote control is functional, and the chip was compatible with the copier and the tow remote control should have the correct frequency.

2. Please check the part Number of the remote control in the list, the copier remote control can only copy the remote control in the list.

The LIST :

2260(as,PT2260,SC2260,HS2260 LX2260,HX2260);2262(as,PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240 LX2241 SCL2240),CS5211,1527( EV1527,HS1527,HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527),SMC918,AX5026,SMC926,AX5326-3,AX5326-4,FP527,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F630 ULN2003 Etc.

3. the Encrypted remote control can not be copied.

 4. Make sure the code of the copier remote control is cleared before copy any other remote control. or it will be fail to copy.

 5. When you copy the remote control with this product, please make sure you are far from the Electromagnetic signal such as the smart phone, the WIFI Router. And please make sure the remote control have enough Battery power.

You must hold the original remote control and the Copier remote control in Back To Back position. And also make sure the original remote control work functionally.