Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 1 CH
Remote Control Distance:0-3000 M
( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: PT2262
Frequency:315 or 433 MHz
Size: 150mm x 42mm x 26mm
Power Supply: 1 x 6F22 9V Battery
(NOT included)
2.Receiver
Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Momentary,can Change it by yourself.)
Decode: Fixed code, soldering
Power Supply (Operating Voltage): DC 9V / 12V / 24V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Operating Temperature:-40‘C - 80’C
3.Package Included
1 x Receiver (with cover)
1/2/3 x Transmitter (
without battery)
4.Learn code and Remove Code
Learn: input DC 9V/12V/24V to the receiver,the green indicator turns ON and last 3 seconds then turns OFF.Then press the learning button ,the green indicator turns ON,then press the transmitter key,the green indicator turns OFF. it means learning successfully.
Remove:keep pressing the learning button on the receiver until the green indicator turns ON >OFF>ON,it means the code is cleared successfully.
Complementos Moda
