Description:

• One Way Remote Control Switch:
• Features:
• Perfect for remote controlling of droplight, crystal lamp, modern low-pressure lamp, absorb dome light, day flower lamp,fluorescent lamp, energy-saving lamps, exhaust fan, LED light etc.
• Fast and easy installation, not obstructed by walls, capable of connecting any loads. Remote controller and switch can be used simultaneously for ease and flexibility.
• Every set of remote controlling switch has its special code. More sets can be used in one room without interference
• Specifications:
• Remote control distance: about 8-15meters indoor, over 20m outdoor
• Input voltage: 200-265V
• Every port load: fluorescent lamp: 800W; energy-saving lamp: 150W;  LED 65W
• Working temperature: -20 to +60 centigrade
• Material: ABS
• Size: As the picture shows
• Power: 12V 23A battery(not included)
• Certification: CCC certification and CE certification
• Two Way Remote Control Switch:
• Function:
• 1. A/1 will light after power on.
• 2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the green group, ''ON"/"OFF" means turn on/off the whole item.
• 3. Manual lighting sequence (wall switch control): A / 1 , B / 2 ,the whole circuit will be turned on.
• Specifications:
• 1. Each group can bear the 1000W incandescent light bulb and 300W energy saving lamp.
• 2. Working Voltage: AC200-245V 50Hz/60Hz
• 3. Remote Control Battery: 12V 23A battery (Battery is not include)
• 4. Remote control distance: about 8-15meters indoor, over 20m outdoor
• 5. Load Power: Every port load: fluorescent lamp: 600W; energy-saving lamp: 150W; LED 50w
• 6. Resistive Load: The largest output power of single group within 3000W.(Like incandescent light or light bulb, etc.)
• Certification: CCC certification and CE certification
• Three Way Remote Control Switch:
• Function:
• 1. A/1 will light after power on.
• 2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the white group, C/2 uses to turn on /off the yellow group, "ON"/"OFF" means turn on/off the whole item.
• 3. Manual lighting sequence (wall switch control): A/1 , B/2 , C/3 , the whole circuit will be turned on.
• Specifications:
• 1. Working Voltage: AC180V-240V 50Hz/60Hz
• 2. Remote Control Battery: 12V 23A battery (Battery is not include)
• 3. Remote control distance: about 8-15meters indoor, over 20m outdoor
• 4. Load Power: Every port load: fluorescent lamp: 600W; energy-saving lamp: 150W; LED 50w
• 5. Resistive Load: The largest output power of single group within 1000W.(Like incandescent light or light bulb, etc.)
• Certification: CCC certification and CE certification
• Quantity: 1 PC
• Note:
  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
  2. Please allow 1-5mm measuring deviation due to manual measurement.

Packaging:

• 1 x Remote Control Reciever (Battery is not include)
• 1 x Remote Control Emitter

​