Item specifics
-
Particle Size
1-10μm
-
Model Number
STARS-922 Heatsink Plaster
-
Net Weight
5g
-
Thermal conductivity
> 0.671W/m-K
-
Thermal resistance
<0.06 Celsius-in2/W
-
Thermal Grease Paste
Conductive Heatsink Plaster
-
Adhesive Glue
For Chip VGA RAM LED IC Cooler Radiator Cooling
Features:
1. It has good conductivity and wide service temperature range(-60~200), short term 300 high temperature.
2. The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free.
3. It can be applied safely in elastic adhesion, heat dissipation, insulation and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.
4. It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.
100% Brand New
Use for : North-south bridge video card heat dissipation part
Used to paste heat sink with IC chips,and be cooling body with good thermal effect
Model : STARS-922
Net Weight: 5g
Thermal conductivity : >0.671 W/m-k
Thermal resistance : <0.06 °C-in2/W
Operation Manual:
1. When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.
2. The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
3. Recommended coating thickness: 0.1-0.5mm, the thinner the better.
4. Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.
Package Included:
1 x Heatsink Plaster
|
Complementos Moda