especificación	Black

Descripción
Comentarios de clientes(0)

Item specifics

Use: Electric Door,Universal
Wireless Communication: RF
Model Number: Electric Cloning Universal Gate Garage Door Remote Control
Package: No
Channel: 4
Frequency: 433 MHz
Support APP: Yes
Brand Name: xingzhaotong
NO.: XZT000385

Product Description

Note : Pls read Carefully befor you buying!!!
Pay Attentions to:
Dear friend, please check the following instructions before you buy; if you do not meet the conditions still to buy, we will not accept returns

Please confirm
Condition I: the original remote control may be used normally
Condition II: know the transmission frequency of original remote control (referring to the following diagram)
Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.
IC model of original remote control is 2262 2260 1527 2240 and compatible IC
It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code.

inapplicable The inapplicable IC is HCS300 30 and compatible rolling code
It's very very important. Don't ingnore them.
Don't simple think the frequeny is same then it can be copied.It's not true.
Features:
With this remote cloner you can clone all 433.92MHz fixed code key fobs. Some remotes that use this frequency are listed below. This is not a complete list! If your remote uses the 433.92MHZ frequency it will work with the remote duplicator (note: rolling code remotes will not work)
Specifications:
Operating frequency: 433.92MHz
The battery used in the product is 12V and 23 A(not includ). please replace the battery when the remote control distance is insufficient
Size: 55mm x 28mm x 14mm
Distance: Up to 100 meters

How to use:
1. Clear code
Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.
2. Mutual-Duplicating
Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on – off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.
Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks.

Package included:
1×Remote Control
Note:We don't offer retail package,but we will pack it well before shipped out.